GE 49-60634-1 owner manual USE of Extension Cords, Safety Instructions Operating Instructions

Page 3

www.GEAppliances.com

USE OF EXTENSION CORDS

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 120 volts.

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

Safety Instructions Operating Instructions

The power cord of this appliance is equipped with a 3-prong (grounding) plug which

mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

If you have only a standard

2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded

3-prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged.

Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful

not to roll over or damage the power cord.

Installation Instructions Troubleshooting Tips Consumer Support

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Consumer Support Installation InstructionsInstallation Instructions Operating InstructionsTips Installation Instructions Operating Refrigerants Before replacing a burned-out USE of Extension Cords Safety Instructions Operating InstructionsUSE of Adapter Plugs Tips Installation Instructions Operating InstructionsAbout the control On the refrigerator How To Test TemperaturesDoor Shelves About the refrigerator featuresShelves Freezer CompartmentReplacing the Light Bulb Care and cleaning RefrigeratorCleaning the Outside Cleaning the InsideAfter defrosting Care and cleaning of the refrigeratorDefrosting To defrostPreparing to Move Preparing for VacationRead these instructions completely and carefully Preparing to install the refrigeratorPlace the fresh food door on the bottom hinge Door ReversalTroubleshooting tips Problem Possible Causes What To DoSave time and money Moisture forms on Air carries moisture Into refrigerator when Door is openedWarm Refrigerator has odorWhat GE Will Not Cover GE Refrigerator One-Year Limited WarrantyOrder to Make a Warranty Claim What GE Will ProvidePage Contact Us Parts and Accessories

49-60634-1 specifications

The GE 49-60634-1 is a high-performance thermostat designed to enhance the efficiency and comfort of heating, ventilation, and air conditioning (HVAC) systems in residential and commercial settings. This device exemplifies GE's commitment to innovation and energy conservation, featuring advanced technologies that cater to the modern user's needs.

One of the standout features of the GE 49-60634-1 is its intuitive digital display, which allows users to easily navigate through various settings and configurations. The large, backlit screen ensures visibility in low-light conditions, making adjustments simple and straightforward. The user interface is designed to be user-friendly, reducing the learning curve for those who are new to smart thermostats.

The thermostat supports Wi-Fi connectivity, enabling remote access and control through a dedicated mobile application. This feature allows users to adjust temperature settings from anywhere, significantly enhancing convenience. Additionally, the app can provide real-time energy usage reports, helping users monitor and optimize their consumption patterns, further contributing to energy savings.

Another notable technology incorporated into the GE 49-60634-1 is its compatibility with various HVAC systems, including conventional, heat pump, and multi-stage heating and cooling systems. This versatility ensures that homeowners and businesses can integrate the thermostat seamlessly into their existing infrastructure without major modifications.

The GE 49-60634-1 also employs advanced scheduling capabilities, allowing users to set specific heating and cooling schedules tailored to their daily routines. This not only improves comfort but also helps reduce energy costs by ensuring that the system operates only when needed.

Moreover, the thermostat includes adaptive learning capabilities, which analyze user behavior and adjust settings accordingly over time. This feature enhances comfort while optimizing energy usage without requiring constant manual adjustments.

In terms of design, the GE 49-60634-1 boasts a sleek and modern aesthetic that complements a variety of decors. Its compact design makes it suitable for installation in various spaces, ensuring it doesn’t detract from the overall look of the room.

In summary, the GE 49-60634-1 is a technologically advanced thermostat that prioritizes convenience, energy efficiency, and user comfort. With its strong connectivity options, adaptability to different HVAC systems, and intelligent scheduling features, this thermostat is an excellent choice for anyone looking to upgrade their climate control solutions.
Top Page Image Contents