GE TNX22BACWW, TNX22BACBB dimensions Collar Trim Installation, Soffit Ceiling 13 to 14 Cabinet

Page 3

TNX22BACWW - GE Profile Performance21.9 Cu. Ft. CustomStyleNo-Frost Top-Freezer Refrigerator

Collar Trim Installation

12" Soffit

8' Ceiling

13" to 14" Cabinet

Refrigerator

Case

Magnetic

Tape

Door Gasket

3/4" Cabinet

Side Panel

1/2" Cabinet

Side Panel

Side Trim

Side trim must be installed flush with the gasket contact surface on the case.

Overhead

Cabinet

Cabinet

Door

 

1"

Case

 

 

Top

 

Trim

70-1/4"*

24-1/2"

An enclosure is required to match up to the trim, see Typical Installation. To obtain the most integrated look, the cabinet or soffit above the refrigerator should extend out to the same depth as the side panels. The refrigerator opening must have minimum dimensions of 70-1/4" high x 36-1/8" wide x 24-1/2" deep as shown at right. If there is an overhead cabinet, allow 1" for cabinet door clearance with the top trim piece so the cabinet doors can be opened without hitting the top trim. If 1/2" side panels are used, then side trim and panel will be even. If 3/4" side panels are used, then some of the side panel will extend beyond the trim and must be finished.

36-1/8"

*The rough-in dimension of 70-1/4" is minimum and is measured from the finished floor to top of opening (or the underside of the overhead cabinets).

For Models with Trim Kit: If frameless style cabinets are planned for above the refrigerator, you may need to consider adding a maximum of 1/4" (70-1/2") to height of opening to allow addi- tional clearance between cabinet doors and top of refrigerator trim when cabinet doors are in open position.

Specification Revised 10/99

VOLUME and

SHELF AREA

Manufacturer Certified to

ASSOCIATION OF HOME

APPLIANCE MANUFACTURERS

ANSI/AHAN HRF-1-1979

Total volume and shelf area are calculated by the Association of Home Appliance Manufacturers’ standards.

R

Listed by

Underwriters

Laboratories

C

For answers to your Monogram,® GE Profile Performance Series,

GE Profileor GE appliance questions, call GE Answer Center® service, 800.626.2000.

®

US

Image 3
Contents Clearances Case Dimensions in inches/cmDoor Panel Dimensions in inches Rough-In Dimensions in inchesSoffit Ceiling 13 to 14 Cabinet Collar Trim InstallationFeatures and Benefits

TNX22BACWW, TNX22BACBB specifications

The GE TNX22BACBB and TNX22BACWW are two standout models in the world of home heating and cooling solutions. These air conditioners are designed to offer exceptional performance, energy efficiency, and user-friendly features, catering to the needs of modern households.

One of the primary features of the TNX22BACBB and TNX22BACWW is their energy efficiency. Both models are designed to operate with a high Energy Efficiency Ratio (EER), ensuring that they consume less energy while providing optimal cooling. This efficiency translates into lower utility bills and a reduced environmental footprint, making them an eco-friendly choice for consumers looking to minimize their impact on the planet.

The technology behind these models incorporates advanced inverter technology, which allows the compressor to adjust its speed based on the cooling demand. This means that the air conditioner can operate more quietly during light cooling loads while ramping up for maximum output during hotter days. Additionally, this technology helps to avoid the energy-wasting start-and-stop cycles typical of less efficient systems.

User convenience is another highlight of the TNX22BACBB and TNX22BACWW. Both models come equipped with a user-friendly digital display and intuitive controls, allowing homeowners to easily set their desired temperature and modes. Remote control functionality is also featured, enabling users to adjust settings from a distance, which is particularly useful during hot summer days when one might want to pre-cool the space before arriving home.

Durability is another essential characteristic of these air conditioners. Constructed with high-quality materials and designed to withstand the rigors of outdoor installation, the TNX22BACBB and TNX22BACWW boast weather-resistant features. This ensures they maintain optimal performance and longevity, even in challenging climatic conditions.

Noise reduction technology is incorporated into both models, allowing for quieter operation compared to traditional units. This is particularly beneficial for residential areas where noise can be a concern.

In summary, the GE TNX22BACBB and TNX22BACWW air conditioners are a compelling choice for consumers seeking quality, efficiency, and advanced technology in their heating and cooling solutions. With their energy-saving features, user-friendly controls, and reliable performance, these models stand out as effective solutions for year-round comfort in any home.