Peavey 12 D manual Applications, Fuse, IEC Power Cord Connection, ON-OFF Switch

Page 5

APPLICATIONS

The Peavey PR®12D has a variety of applications such as sound reinforcement, public address, side fill system, karaoke or musical playback. With the optional monitor stand kit, the Peavey PR 12D makes an excellent stage monitor.

A typical signal source for the line-level inputs of the Peavey PR 12D would be a sound reinforcement mixing console (mixer) or the output from a CD player, iPod player or tape deck. A dynamic microphone can be connected and used as well.

R E A R P A N E L

1

2

FUSE

The unit is AC power line fuse protected from overloads and fault conditions with a fast-blow 3.15 Amp fuse. This fuse is located within the cap of the enclosure. If the fuse fails, THE FUSE MUST BE REPLACED WITH THE SAME TYPE AND VALUE IN ORDER TO AVOID DAMAGE TO THE EQUIPMENT AND TO PREVENT VOIDING THE WARRANTY. If the unit blows a fuse, it should be taken to a qualified service center for repair.

1IEC POWER CORD CONNECTION

This receptacle is for the IEC line cord (supplied) that provides AC power to the unit.

It is very important that you ensure the PR 12D has the proper AC line voltage supplied. You can find the proper voltage for your PR 12D printed next to the IEC line (power) cord on the rear panel of the unit. Please read this guide carefully to ensure your personal safety as well as the safety of your equipment.

Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly. To prevent the risk of shock or fire hazard, always be sure that the mixer and all other associated equipment are properly grounded.

2ON-OFF SWITCH

This rocker switch supplies AC power to the PR 12D when switched to the ON position.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents PR12 D Page Important Safety Instructions Description FeaturesON-OFF Switch IEC Power Cord ConnectionApplications FusePOWER/CLIP LED VolumeGround Lift Primary Input ChannelE R a T I N G I N S T R U C T I O N S Flying the PR 12DConnecting a Signal to the PR 12D Connecting AC Power to the PR12DVolume Control Adjustment USE of PR 12D with a SubwooferTroubleshooting No Output AT ALL MIC/LINE PAD AdjustmentHUM or Buzz Distorted or Fuzzy SoundCleaning Care and MaintenanceArchitectural and Engineering Specifications SUNLIGHT/HEATPage Peavey PR12D Frequency Response Curves Product Category Duration Peavey Electronics Corporation Limited WarrantyCustomer warranty registration
Related manuals
Manual 20 pages 27.19 Kb

12 D specifications

The Peavey 12 D is a versatile and powerful loudspeaker designed to meet the demands of live sound reinforcement and various audio applications. Known for its high performance and reliability, the 12 D is aimed at musicians, DJs, and sound engineers who require quality sound and durability in a portable package.

One of the key features of the Peavey 12 D is its impressive power handling capability. The loudspeaker can handle up to 300 watts of continuous power and peaks at 1200 watts, making it suitable for medium to large venues. This robust power handling allows the speaker to reproduce audio with clarity and impact, ensuring that every note and vocal cut through the mix.

The 12 D employs a 12-inch heavy-duty woofer that provides deep, resonant bass response, ideal for a range of music genres. This is complemented by a high-frequency driver that delivers crystal-clear treble frequencies, allowing for a balanced sound profile. The combination of these components results in a full-range sound that is both vibrant and articulate.

Incorporating advanced technologies, the Peavey 12 D features a constant directivity horn that offers controlled dispersion of sound. This ensures consistent coverage across the audience area, minimizing dead spots and providing an even listening experience. Additionally, the speaker is equipped with Peavey's proprietary EQ settings, allowing users to tailor the sound output to their specific environment or preferences.

Portability and ease of use are also central to the design of the Peavey 12 D. Weighing in at a manageable size and featuring durable enclosures, the speaker is easy to transport and set up. Integrated handles make it convenient for mobile applications, and its rugged construction ensures it can withstand the rigors of touring.

For connectivity, the Peavey 12 D offers versatile input options, allowing for seamless integration into existing sound systems. With all these characteristics combined, the Peavey 12 D stands out as a reliable and powerful choice for anyone looking to elevate their sound experience, whether on stage or at an event. Its combination of performance, technology, and user-friendly features makes it an excellent option for both professionals and enthusiasts alike.
Top Page Image Contents