Fabricating the enclosure, Door Panels | GE PFIC1NBWWV, PFIC1NFZWV

PFIC1NFZ

GE Profile™ Counter-Depth 20.9 Cu. Ft. Bottom-Freezer Drawer Refrigerator

Dimensions and Installation Information (in inches)

Fabricating the enclosure

•The drawing shows an 84" cabinet elevation. Adjust dimensions accordingly for other cabinet elevations.

•Cabinet pieces to order: (2) side panels and (1) wall cabinet.

•Side panels will typically be attached to adjacent cabinets and/or cleated to rear wall and floor.

•Refer to GE refrigerator installation instructions for proper plumbing, and electrical and air clearances.

•(1) Some framed cabinet lines will make a refrigerator enclosure with a cabinet 12" high x 39" wide with sides and 1-1/2" face frame extended down to floor to create the refrigerator space. This will replace the above construction. (2) A tall cabinet on either side of the refrigerator can replace a side panel.

•Counter overhangs on either side of the refrigerator should have clipped corners to allow for full door swing.

•If the refrigerator has a wall returning beyond the front of the refrigerator on either side, a 2" tall filler will help allow for movement of the door.

Door Panels

•See drawings for exact dimensions of the fresh-food and freezer door panels.

•Refrigerator door fronts from stock and most semi-custom cabinet manufacturers will be supplied as 1/4"-thick panels cut to dimensions, with closest available standard door sizes applied to front.

–This will leave a “reveal” at top/bottom and sides. Width of “reveal” will depend on manufacturer’s standard door sizes.

–Door will be affixed on the 1/4" panels at factory or in the field by the local supplier, depending on manufacturer.

•Local shop-built or custom cabinet supplier may fabricate custom 3/4" panels.

In this case, edges must be routed.

•Follow notes on drawing to assure room for fingers/hands to open handles.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000.

Create a custom look for your GE Profile counter-depth bottom-freezer refrigerator

Still another advantage offered by GE Profile counter-depth refrigerators is ease of installation. For a refrigerator that does so much to enhance the beauty of your kitchen, the “behind-the-scenes” preparation and installation are surprisingly simple.

1/2" to 3/4" Side Panel

Listed by

Underwriters

Laboratories

Specification Created 1/10

210820

PFIC1NBWWV, PFIC1NFZBV, PFIC1NBWBV, PFIC1NFZ, PFIC1NFZWV specifications

The GE PFIC series, often referred to by its distinctive model numbers like PFIC1NFZWV, PFIC1NFZ, PFIC1NBWBV, PFIC1NFZBV, and PFIC1NBWWV, encompasses a range of cutting-edge industrial and commercial products designed for varied applications. These advanced devices integrate innovative technologies and features, setting a new standard in performance and efficiency.

A key feature of the PFIC series is its flexible and scalable architecture, allowing businesses to customize functionalities based on their specific requirements. Each model is built to cater to diverse industrial applications, from manufacturing plants to infrastructure projects, ensuring versatility and adaptability in numerous settings.

Energy efficiency is another standout characteristic of the GE PFIC series. Utilizing the latest advancements in energy-saving technologies, these models are engineered to minimize power consumption while maximizing output. The energy-efficient design not only reduces operational costs but also helps organizations meet their sustainability goals.

In addition to energy efficiency, the PFIC models are equipped with advanced control systems that provide precise monitoring and management of processes. These systems allow for real-time data collection and analysis, leading to improved decision-making and enhanced productivity. Users can easily integrate the devices with existing management systems, streamlining operations and facilitating seamless communication across platforms.

The reliability of the PFIC series is further enhanced through robust construction and adherence to stringent quality standards. GE’s commitment to durability ensures that the models are well-suited for demanding environments, capable of withstanding extreme conditions, and prolonged use without compromising performance.

Moreover, safety features are intrinsic to the design of the PFIC models. Built-in mechanisms protect against overload and other potential hazards, ensuring safe operation in diverse settings. These safety features not only protect the equipment but also safeguard personnel, making it a trusted choice for organizations focused on workplace safety.

Innovative connectivity options are also a hallmark of the PFIC series. With support for IoT integration, users can remotely monitor and control their systems, paving the way for smarter and more efficient operations. This connectivity enables proactive maintenance and swift responsiveness to any operational issues that may arise.

In conclusion, the GE PFIC1NFZWV, PFIC1NFZ, PFIC1NBWBV, PFIC1NFZBV, and PFIC1NBWWV models represent a significant advancement in industrial technology. With their unique features, energy efficiency, reliability, and smart connectivity, these products are redefining operational excellence across various industries, driving productivity and ensuring sustainable growth.