GE PSDF5YGX dimensions 210202

PSDF5YGX

GE Profile™ Counter-Depth 24.6 Cu. Ft. Side-By-Side Refrigerator

Rough-In Dimensions and Installation Information (in inches) Installation Tips to Maximize the Built-In Look

•All wall/floor molding should be removed prior to installation.

•Water recess on rear wall recommended to prevent water  line damage. 48" minimum length, 1/4" diameter water  line tubing recommended.

•When possible, recess both copper water line and electrical  outlet. (See local codes)

•Front and rear leveling legs are adjustable for the built-in look.  (See owner’s manual)

*The rough-in dimensions of 70" for 23 cu. ft. models and 72- 1/2" for 25 cu. ft. models are minimum and measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit: If frameless style cabinets are planned for above the refrigerator, you may need to consider adding a maximum of 1/4" (70-1/4") to height of opening for 23 cu. ft. models and 1/8" (72-5/8") for 25 cu. ft. models to allow for additional clearance between the cabinet doors and the top of refrigerator trim when the cabinet doors are in open position.

† Model PSDW3YGX is 71-3/4"

24" Cabinet

Water Electrical

3/4" Airspace

(1/2" Gap + 1/4"

Wall Plates)

25"

Counter

Top

12" Soffit

8' Ceiling

13" to 14" Cabinet

70"*†

23 cu. ft. models

72-1/2"*

25 cu. ft. models

24-1/2"

36-1/8"

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service,  800.626.2000.

Listed by Underwriters Laboratories

As an Energy Star® partner, GE has determined that this product meets the Energy Star guidelines for energy efficiency.

Specification Revised 5/08 210202