TM
Door Panel Dimensions
Order your own custom wood panels to match cabinetry or other decor.
Fresh Food | Freezer Panel | Freezer Panel |
| |
Panels | With Dispenser | Without Dispenser | Weight Limits* | |
Fresh Food = 38 lbs. | ||||
23 cu. ft. | Freezer = 28 lbs. | |||
Panels up to 1/4" thick will fit door frame with no special preparation. | *Total weight of panels | |
Add filler behind material thinner than 1/4" for proper fit. | (i.e., both freezer panels) | |
Note: Panels up to 3/4" will require special routing area around handles. |
| |
Dimensions may vary depending on depth of panel. |
| |
Freezer Panel | Freezer Panel | Fresh Food |
Without Dispenser | With Dispenser | Panel |
Detail C
1/8" |
5/16" |
All other dotted lines indicate areas that must be routed out about 5/32" (4 mm) on the back side of panels 1/4" (6 mm) thick or more. For panels less than 1/4" (6 mm) thick, these areas can be cut out of the filler panel.
Depth of |
material to be |
routed out |
Cut
out 
1/8
5/16
FRONT
14-15/32
Cut
out 
1/8
5/16
14-15/32
FRONT
14-15/32
Cut
1/8 
out
5/16
FRONT
19-15/32
(Fresh Food panel shown) Notch required at top corner as noted.
Panels 1/4" thick
or less
1/4" Max.
| |
1/4" | 5/32" |
| |
| Front |
IMPORTANT: Before finalizing specifications for your GE Profile CustomStyle Refrigerator, please NOTE:
•A minimum of
•Be sure to allow for 1/2" or 3/4" side panels in addition to the
Specification Created 11/01
For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call
GE Answer Center® service, 800.626.2000.
Total volume and shelf
| VOLUME and | area are calculated by the |
| Listed by | |
| SHELF AREA |
| |||
|
|
| Association of Home |
| Underwriters |
|
|
|
| ||
|
|
|
| ||
Manufacturer Certified to | Appliance Manufacturers’ | R | Laboratories | ||
ANSI/AHAN | |||||
ASSOCIATION OF HOME |
|
| |||
APPLIANCE MANUFACTURERS |
|
| |||
|
|
| standards. |
|
|