Philips MC-70 manual Clock/Timer, Sleep Timer Setting, While Sleep mode is activated

Page 26

Clock/Timer

English

Timer Setting

 

 

The system can switch on to CD,TUNER, or

 

TAPE mode automatically at a preset time,

 

serving as an alarm to wake you up.

IMPORTANT!

–Before setting the timer, ensure that the clock is set correctly.

–The timer will always be switched on after it has been set.

–The timer will not start if a recording is in progress.

–The volume of the timer will increase gradually from the minimum level to the last tuned volume level.

1Press and hold TIMER on the remote control for more than two seconds.

➜ "AM 12:00" or "00:00" or the last timer setting will start flashing.

➜ TIMER will start flashing.

➜ The selected source will be lighted while other available sources are flashing.

2Press CD 1•2•3, TUNER or TAPE to select the desired source.

●Before setting the timer, make sure the music source has been prepared.

CD 1•2•3 – Load the disc(s).To start from a specific track, make a programme (refer to “CD Operation - Programming the disc tracks”). TUNER – tune to the desired radio station.

TAPE – load a prerecorded tape.

3Press à or á on the system repeatedly to set the hour for the timer to start.

4Press í or ë on the system repeatedly to set the minute for the timer to start.

5Press TIMER to store the start time.

➜"TIMER ON" will be displayed and followed by the set timer "XX:XX" and then the selected source.

➜TIMER will remain on the display.

●At the preset time, the selected source will play.

To exit without storing the setting

●Press Çon the system. Notes:

–If CD is the selected source and it is not available when the preset time is reached,Tuner will be selected automatically.

–During timer setting, if no key is pressed within 90 seconds, the system will exit timer setting mode automatically.

26

pg 001-029/MC50-70/22-Eng

26

To check the TIMER

●Press TIMER on the remote control.

➜If the timer has been activated, the set timer information will be displayed.

➜If the timer has been deactivated, "OFF" will be displayed.

To activate/deactivate the TIMER

●Press TIMER ON/OFF repeatedly on the remote control.

➜If activated, the last set timer information will be shown for a few seconds and TIMER will appear on the display.

➜If deactivated, “OFF” will be displayed.

Sleep Timer Setting

The sleep timer enables the system to switch to Standby mode automatically within a preset amount of time.

1Press SLEEP on the remote control repeatedly to select a preset amount of time.

➜The selections are as follows (time in minutes):

15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15 …

➜"SLEEP XX" or "OFF" will be displayed.

"XX" is the time in minutes.

2When you reach the desired length of time, stop

pressing the SLEEP button.

➜SLEEP will appear on the display, except for "OFF" mode.

➜The Sleep Timer is now set. Before the system switches to standby mode, a countdown of 10 seconds will be displayed.

"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1" ™ "SLEEP"

While SLEEP mode is activated

To check the remaining length of time

●Press SLEEP once.

To change the preset sleep timer

●Press SLEEP twice.

➜ The display will show the remaining time followed by the sequence of sleep timer options.

To deactivate the Sleep Timer

●Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button.

3/7/01, 2:23 PM

3139 115 20742

 

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Audio Mains plug How to connect a plugImportant notes for users in the U.K Copyright in the U.K3139 115 Klass 1 laseraparat Luokan 1 laserlaiteIndex Contents General Information Supplied accessoriesSafety Information Environmental InformationRear Connections For optimal performance, use only the original power cablePreparations Inserting batteries into the Remote Control Optional ConnectionsControls on the system and remote control Controls Basic Functions Preparation proceduresTo reinstall Plug and Play Plug and PlaySwitching the system to Standby mode Demonstration modeSwitching the system on Switching the system to Eco Power Standby mode 1 WattInteractive Sound Control Dim modeVolume Control Bass or Treble level Feature enables you to define the soundBass/Treble Is Incredible Surround Appear on the displayCD Operation Discs for PlaybackDisc Playback Programming the disc tracksFor Recording, please refer to Tape Operation/Recording RepeatShuffle Radio Reception Tuning to Preset Radio Stations Erasing a Preset Radio StationRadio stations To cancel News functionTo start News function Recommended for use in this system Tape PlaybackDeformed or damaged. It is not SpeakerOne Touch Recording General Information on RecordingPreparation for Recording Other rights of third parties are notDigital Recording via Digital Out Tape Operation/RecordingCD Synchro Recording Listening to External SourcesDisplay Clock Possible to operate the clock or timerTo exit without storing the setting FunctionSleep Timer Setting Clock/TimerTimer Setting While Sleep mode is activatedCD Player SpecificationsAmplifier SpeakersProblem Solution MaintenanceTroubleshooting CD OperationRadio Reception Tape OPERATION/RECORDING

MC-70 specifications

The Philips MC-70 is a compact and versatile music system that reflects the brand’s dedication to high-quality audio performance and modern convenience. Designed to meet the demands of music lovers, the MC-70 integrates several advanced technologies and features that enhance the listening experience.

At the heart of the Philips MC-70 is its high-fidelity sound system. It is equipped with powerful speakers that deliver a rich and immersive audio experience, allowing users to enjoy their favorite tunes with clarity and depth. The system is designed to reproduce a wide range of frequencies, ensuring that both low bass and high treble sounds are well represented. Moreover, the design of the speakers minimizes distortion, providing clean sound even at higher volumes.

One of the standout features of the Philips MC-70 is its multi-format playback capability. Users can enjoy a variety of audio formats, including CDs, MP3s, and even cassette tapes. This versatility makes the MC-70 suitable for listeners with extensive music collections across different media. Additionally, it includes a built-in radio tuner, allowing users to access their favorite radio stations and enjoy live broadcasts.

In terms of connectivity, the Philips MC-70 is designed to be user-friendly. It features an auxiliary input that enables users to connect external devices, such as smartphones or tablets. This means that streaming music from various sources has never been easier. Furthermore, the inclusion of USB ports allows for direct playback from USB flash drives, providing yet another convenient option for enjoying music.

The design of the MC-70 is sleek and modern, fitting seamlessly into any home environment. Its compact size makes it an ideal choice for those with limited space, while the intuitive controls ensure easy operation. The display is easy to read, allowing users to navigate through their music options effortlessly.

In summary, the Philips MC-70 is an innovative music system that combines high-quality audio performance with versatile playback options. Its powerful sound, multiple connectivity features, and modern design make it an excellent choice for anyone looking to enhance their music listening experience. With this system, Philips continues to uphold its reputation for producing reliable and user-friendly audio equipment.
Top Page Image Contents