Philips MCM148 Programming track numbers, Reviewing the programme, Erasing the programme

You can also press 9 to cancel your play mode.

Note:

– The SHUFFLE and REPEAT functions cannot be used simultaneously.

●

CD/MP3 Operation

3 Press TUNING 4 ¢ (on the remote control ¡ / ™) to select a desired track.

4 Press 2; to start playback.

● During playback, press CLOCK/DISPLAY on the remote control to show the title name, album name, ID3 information and clock time.

Supported MP3 disc formats:

– ISO9660, Joliet, UDF 1.5

– Maximum title number: 999 (depending on filename length)

– Maximum album number: 99

– Supported sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz

– Supported Bit-rates: 32~256 (kbps), variable bitrates

Different play modes: SHUFFLE and

REPEAT

You can select and change the various play modes before or during playback.The play modes can also be combined with

PROGRAMME.

SHUF......................tracks of the entire disc are

played in random order REP ALL...............repeats the entire disc/

programme

REP..........................plays the current track

continuously

REP ALB ..............repeats all tracks in the current

(for MP3/WMA only) album

1 To select your play mode, press MODE on the set or press REP, REP ALL or SHUF on the remote control before or during playback until the display shows the desired function.

2 Press 2; to start playback if in the STOP position.

➜ If you have selected SHUFFLE, playback starts automatically.

3 To return to normal playback, press MODE on the system or press REP, REP ALL or SHUF on the remote control until the various SHUFFLE/ REPEAT modes are no longer displayed.

English

14

Programming track numbers

Programme in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 40 tracks can be stored in the memory.

1In the stop position, use the TUNING 4 ¢

(on the remote control ¡ / ™) to select your desired track number.

●For MP3/WMA, you may press ALBUM/ PRESET+/- to select a desired album, then press TUNING 4 ¢ (on the remote

control

¡ / ™) to select your desired track.

2Press PROG. to store.

➜Display: prog flashes, and -- PR 01 is displayed briefly, then the selected track number (and the selected album number for MP3).

3Repeattracks. steps 1-2 to select and store all desired

4To start playback of your disc programme, press

2;.

Reviewing the programme

●Stop playback and press PROG repeatedly.

●To exit review mode, pressÇ.

Erasing the programme

You can erase the programme by:

●pressing 9 once in the STOP mode;

●pressing 9 twice during playback;

●opening the CD compartment;

➜ prog disappears from the display.