Philips MC-V320 Playing a disc, Selecting a different track, Finding a passage within a track

CD/VCD/MP3-CD Operation

Playing a disc

●CD-ROM, CD-I, CDV, DVD or computer CDs, however, are not possible.

1Select VCD/ CD source.

2Press CD OPEN on the top

of the system to open the CD compartment.

➜OPEN is displayed when you open the CD compartment.

3Put a disc with the printed side facing up and press down. Push the front panel to close.

➜READING as the CD player scans the contents of a disc, and then the total number of tracks and playing time are shown. (CD/ VCD only)

4Press to start playback.

➜Current track number and elapsed playing time of the track are displayed during disc playback.

5To interrupt playback press . Press again to resume play.

6To stop disc playback, press STOP 9.

Note: CD play will also stop when;

– the CD door is opened.

– the disc has reached the end.

– you select another source:TAPE,TUNER or AUX.

For MP3-CD only

●Load a MP-3 CD format music disc on the disc tray.

➜ The total album number and total title/ track number "018 120" will be displayed. MP3, ALB and TRH will be shown.

Notes:

–Load the discs with the label side facing up.

–To ensure good system performance, wait until the disc completely reads the disc before proceeding.

–For MP3-CD, the disc reading time may exceed 10 seconds due to the large number of songs and different formats compiled into one disc.

Selecting a different track

●Press or once or repeatedly until the desired track number appears in the display.

●If you have selected a track number shortly after loading a disc or in the PAUSE position, you will

need to press to start playback.

●Press digit 0/-- – 9 on the remote control to direction selecting the desired track.

For MP3-CD only

To select a desired Album

●Press or (or ALBUM –/+ on Remote Control) repeatedly until the desired Album appears on the display.

➜ ALB and “0XX 120” will be displayed.

To select a desired Title/ Track

●Press or (on TITLE –/+ on Remote Control) repeatedly until the desired Title appears on the display.

●Use the digital keys on the remote control to select the track.

➜ TRH and “018 XXX” will be displayed.

Notes:

–ALB represents ALBUM and TRH represents Title/ Track, "XX" or "XXX" is the current selected Album or Title/ Track number.

–Press & hold digit “0/ –” will show

–“– –” for CD & VCD

–“– – –” for MP3 then Press 0-9

Finding a passage within a track

To search for a particular passage during playback:

1Press and hold down on or (on à / á on Remote Control)

➜The disc is played at high speed and low volume. (CD only)

2When you recognise the passage you want, release or . (on à / á on Remote Control)

➜Normal playback continues.

Note:

–During a disc programme or if SHUFFLE/ REPEAT active, searching is only possible within the same track.

English

15