Philips MX5500D owner manual Check the disc type, color system and region code. see

Page 47

Troubleshooting

Problem

The DVD player does not start playback.

Cannot activate some features, such as Angles, Subtitles, or multi-language Audio.

There is no sound from the center and surround speakers.

Radio reception is poor.

The remote control does not function properly.

The timer is not working.

The display panel is dark.

Low hum or buzz sound.

Solution

–Insert a readable disc with the playback side facing down. (see page 24)

–Check the disc type, color system and region code. (see page 24)

–Check for any scratches or smudges on the disc.

–Press SYSTEM SETUP to turn off the setup menu screen.

–Change the rating level. (see page 35)

–Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour.

–The features may not be available on the DVD.

–Changing the language for the sound or subtitle is prohibited on the DVD.

–Make sure the center and surround speakers are connected correctly. (see page 14)

–Press SURROUND button to select a correct surround sound setting. (see page 41)

–Make sure the source you are playing is recorded or broadcast in surround sound (DTS, Dolby Digital, etc.)

–If the signal is too weak, adjust the antenna or connect an external antenna for better reception.

–Increase the distance between the system and your TV or VCR.

–Tune in to the correct frequency.

–Place the antenna farther away from any equipment that may be causing the noise.

–Select the source (DISC or TUNER, for

example) before pressing the function button (ÉÅ, S, T.)

–Reduce the distance between the remote control and the system.

–Replace the batteries with new ones.

–Point the remote control directly toward the IR sensor.

–Check that the batteries are loaded correctly.

–Set the clock correctly. (see page 20)

–Press and hold CLOCK•TIMER to switch on the timer. (see page 39)

–Press DIM again. (see page 42)

–Place the DVD system as far away as possible from electrical devices that may be causing interference.

E n g l i s h

45

Page 46 Page 48
Image 47
Page 46 Page 48
Contents MX5500D Playing a disc ContinueNeed help? Call us Inside this laser product EnglishFrançais 0 ! @ # $ % Model Registration Owner ConfirmationDear Philips product owner HurryClass II equipment symbol Important Safety InstructionsP a ño l Fr a n ça i s E n g l i s h IndexEnvironmental information Contents Timer Operations General Information Supplied accessoriesCare and safety information Connections Set up the speakers Placing the speakers SubwooferUsing Component Video jacks Pr Pb Y Connecting TVUsing Composite Video jack Cvbs Set the P-SCANswitch to ‘OFF.’Using an accessory RF modulator Using S-Video jackConnecting FM/AM antennas Connecting speakers and subwooferOn the DVD system Connecting the power cordConnections optional Connecting a VCR or Cable/Satellite BoxUsing the VCR for recording DVDs Recording digital Connecting digital audio equipmentListening to the playback Speaker display panel System display panel Main unit and remote controlDisc trays 1~5 IR SensorControl buttons available on the remote only Functional OverviewTo view the clock time in any active mode Press Clocktimer Inserting batteries into the remote controlSetting the clock Using the remote control to operate the systemTo remove the menu Setting the TVChanging the NTSC/PAL setting via the remote control Selecting the color system that corresponds to your TVPress Seating Selecting speaker layoutChannels Changing seating control positionDisc mode, stop playback and press System Menu Select Setting language preferenceSetting the speakers’ channels Turning on or off the sound outputPlaying discs Disc OperationsPlayable discs Resuming playback from the last stopped point DVD/VCD Using the Disc MenuTurning on/off auto Eco standby mode Basic playback controlsRepeating a section within a chapter/ track Repeat play modeSelecting various repeat functions Program favorite tracks audio CDs and VCDsStop playback, then press and hold Ç Using the menu bar to programDisc X appears Clearing the programUse the numeric keypad 0-9 or joystick Playing MP3/Picture disc Kodak, JpegProgram MP3 disc Playing Jpeg pictures from memory card Precaution on handling the memory cardMedia Slot Operations About media slotDVD Menu Options Using the menu barSetting the TV shape Using the Setup MenuScreen Saver turning on/off Setting the video output Setting the analog output I s hSetting the digital output Setting the PCM output Reset Night mode turning on/off Restoring to original settingsNight Mode Defaults Press System Menu again to remove the menu Restricting playback by Parental ControlOnly available in region 1 players Use the numeric keypad 0-9 to enterEnter the same new four-digit password again G l i s h Changing the passwordTuner Operations Presetting radio stationsTuning to radio stations Using the Plug and PlayTo select a preset number Selecting a preset radio stationAutomatic presetting Manual presettingActivating/Deactivating the timer Timer OperationsSetting the timer Selections are as follows time in minutes Setting the Sleep timerTo check or change the setting To cancel the sleep timerSound Control Sound and Volume ControlsVolume control Dimming system’s display screen Switching on/offUsing the remote to operate your television Other FunctionsAmplifier Section SpecificationsClean the disc. see TroubleshootingProblem SolutionCheck the disc type, color system and region code. see Glossary Glossary Limited Warranty

MX5500D specifications

The Philips MX5500D is a cutting-edge home audio system designed to deliver a rich and immersive listening experience. Known for its sleek design and powerful performance, the MX5500D caters to both music enthusiasts and casual listeners alike.

One of the standout features of the Philips MX5500D is its integrated CD player. This allows users to enjoy their favorite CDs with excellent sound quality. The device supports various disc formats, providing versatility for a range of music collections. Additionally, the system features a built-in FM tuner, enabling users to access their favorite radio stations with ease.

The MX5500D distinguishes itself with its digital sound processing technology, which optimizes audio output for different types of content. Whether users are listening to music, watching movies, or playing video games, this technology enhances the overall sound quality, ensuring clarity and depth that brings content to life.

Connectivity options are another highlight of the Philips MX5500D. With USB ports and auxiliary inputs, users can easily link their devices to the audio system. This feature allows for music playback directly from smartphones, tablets, or USB drives. Furthermore, Bluetooth connectivity is often included in this model, allowing for seamless wireless streaming from compatible devices without the hassle of tangled wires.

The MX5500D also boasts a powerful amplifier that drives the built-in speakers, delivering robust and dynamic sound. The speaker system is designed to produce rich bass and clear treble, resulting in a well-balanced audio profile that suits various music genres. The design of the speakers complements the overall aesthetics of the system, making it a stylish addition to any living room or entertainment space.

Another noteworthy aspect of the Philips MX5500D is its user-friendly interface. The intuitive remote control and easy-to-navigate on-screen menus provide a hassle-free experience for users. Whether adjusting the volume, changing tracks, or switching inputs, the system is designed for simplicity and convenience.

In summary, the Philips MX5500D is an impressive audio system that brings together advanced technology and user-friendly features. Its combination of versatile playback options, enhanced sound processing, and stylish design makes it a strong contender in the home audio market. Whether for everyday listening or special occasions, the MX5500D has the capabilities to elevate any audio experience.
Top Page Image Contents