Samsung RF24FSEDBSR user manual Operating your French Door Refrigerator, Using the Control Panel

Operating your French Door Refrigerator

USING THE CONTROL PANEL

( 3 )
Alarm	The Alarm button serves two purposes:
(Hold 3		02
	- To turn the door open alarm on and off.
sec for
	- To reset the water fi lter life indicator.
Filter
	1) Door Alarm Function
Reset
	If the door alarm is set to On, an alarm

1

2

3

10

7

4

5

6

9

8

beeps if any refrigerator door is left open	OPERATING
for more than three minutes. The beeping
stops when you close the door. The door
alarm function is pre-set to On in the
factory. You can turn it off by pressing and
then releasing the Alarm button. You can
turn it back on in the same fashion. The
icon lights up when the function is on.
When the Door Alarm function is on and
the alarm sound is triggered, the Door
Alarm Icon will blink while the alarm
sounds.

(1 ) Touching this button turns Energy Saver Energy mode on and off. When you turn Energy Saver Saver on, the Energy Saver icon lights.

Turn Energy Saver off and the icon goes off. The Energy Saver function’s factory setting is “ON”. If condensation or water

drops appear on the doors, turn the Energy Saver mode off.

(2 ) The Freezer button serves two purposes:

Freezer	- To set the Freezer to your desired
(Hold 3	temperature.
sec for	- To turn the power freeze function on
Power	and off.
Freeze)	1) To set the Freezer temperature
	Touch the Freezer button to set the
	Freezer to your desired temperature. You
	can set the temperature between -15 °C
	and -23 °C.
	2) Power Freeze function
	Touch and hold this button for 3 seconds
	to decrease the time needed to freeze
	products in the Freezer.
	It can be helpful if you need to quickly
	freeze easily spoiled items or if the
	temperature in the freezer has warmed
	dramatically (For example, if the door was
	left open).
	When you use this function the energy
	consumption of the refrigerator will
	increase. Remember to turn it off when
	you don’t need it and return the freezer
	to your original temperature setting. If you
	need to freeze large amount of food stuff,
	activate Power Freeze function at least 20
	hours before.

2) Water Filter Life Indicator Function

After you replace the water fi lter, touch

and hold this button for 3 seconds to

reset the water fi lter life indicator. When

you reset the water fi lter life indicator, the

Filter icon on the panel turns Off. The

Filter icon will turn red to let you know it

is time to change the water fi lter after six

months (about 300 gallons). Some areas

have large amounts of lime in their water,

which causes the water fi lter to clog more

quickly. If this is the case in your area,

you will have to change the fi lter more

frequently than every six months.

operating _23

DA68-02916A (EN)-07.indd 23 2014. 5. 19. ￿￿ 2:06