CHECKING THE WATER DISPENSER LINE
1)In order to operate the ice maker properly, water pressure of 20 ~125 psi (0.138~0.862Mpa) is required. In this range, a 6 oz paper cup can be filled in 10 secs.
2)The water filter removes particles. It does not sterilize or destroy any
3)If the refrigerator is installed in an area with low water pressure (below 20psi), you should install a booster pump to compensate.
4)Ensure the water storage tank inside the refrigerator is properly filled initially. Push the water dispenser lever until the water runs from the outlet.
A universal water supply kit is available at extra cost from your dealer. The refrigerator manufac- NOTE turer recommends using a water supply kit containing copper tubing.
INSTALLATION INSTRUCTIONS
31