Samsung RS267TDPN user manual Setting Up The Refrigeratorcont’D, Reattaching the Water Supply Line

setting up your side-by-side refrigerator

SETTING UP THE REFRIGERATOR(CONT’D)

If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.

Tools you will need

Philips Screwdriver Flat-blade Screwdriver 10mm Socket Wrench

Removing the Front Leg Cover

First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the three screws counter-clockwise.

FRONT LEG COVER

SCREW

Separating the Water Supply Line from the Refrigerator

1.Remove two water lines(gray one is for ice and the other one is for water)by pressing the coupler

1 and pulling the water line 2 away.

1

	Make sure the color of the
2	water lines match.

Reattaching the Water Supply Line

1.The Water Line must be fully inserted to the marked line to prevent water leakage from the dispenser.

2.Insert the 2 clips in the install pack

and check that each clip holds the line firmly. These clips are for door re-installation only.

Line

Coupler

clip A (¼”) (6.35mm)

Coupler

Line

Coupler

clip A (¼”) (6.35mm)

Coupler

The water line must be fully inserted to the marked line to prevent water leakage from the dispenser.

14_ setting up