Samsung RL34EC Changing the direction of the door openingRL34EG, Preparing the appliance for use

Page 5

Safety Precautions

Caution

When comparing the appliance with other refrigerators, please refer to the model and number;

Before the appliance is connected to the power, verify if voltage rating of the refrigerator is same to the power voltage. The voltage can be variable from 187V to 240V; if the power voltage can not meet the requirements, an automatic transformer with a minimum output of

Changing the direction of the door opening(RL34EG*)

COVER TOP FRONT

COVER TOP UPP

SCREW B

 

CAP HOLE TOP

CAP SPACER DOOR

 

500W shall be used.

If the appliance is disconnected from the power, you should wait for at least five minutes before reconnection; otherwise there may be a hazard to the compressor.

Do not store food close to the temperature sensor; otherwise it may display wrong temperatures.

Do not open and close the door too frequently or for a long time during hot weather; otherwise it may affect the efficiency of the entire unit and burden the appliance with excessive load.

Do not leave the refrigerator upside down or horizontal or keep inclined over 45 degree to the ground if necessary;

Do not pull or push the appliance by holding the door handles or exert too much upward/ downward forces on the door handle;

COVER HINGE UPP L

SCREW F

CAP SCREW CABI

CAP HINGE HOLE

SCREW A

SCREW F

CAP SCREW CABI

CAP HINGE HOLE

HINGE UPP R

SHAFT-HINGE

COVER HINGE UPP R

CAP SCREW HANDLE

SCREW C

CAP HOLE DOOR

If a lot of hot foods are stored at the same time or the door is opened frequently or kept open for a long period of time, the internal temperature will rise and the temperature display may flash. It will be recovered normal after a period of stable operation;

The refrigerator must be located with an easy access to the power supply.

Alert

The cooling effects originates from refrigerant that is filled through

special process. Please ensure the pipes in the rear are intact.

 

This appliance adopts R600a refrigerant which is combustible.

During transportation and installation, please handle the appliance carefully to protect the cooling system from damage.

The refrigarant leaked from the pipe may catch fire or hurt your eyes. If refrigerant leakage occurs, please keep away the fire or potential fire source, and keep the room aired for several minutes.

SCREW A

MID HINGE

STOPPER DOOR

SCREW E

CAP HANDLE

SCREW G

 

 

 

REINF

 

 

 

SCREW D

 

 

CAP HOLE DOOR

FOOT

HINGE LOW

 

SCREW C

 

FIXER HINGE LOW

SCREW D

 

 

 

 

 

STOPPER HINGE LOW

 

 

 

SHAFT HINGE

FOOT

 

 

CAP SCREW HANDLE

 

-To avoid the combustible gas composed of the refrigerant leaked from the cooling circuit and the air, please select the room size to accommodate t he appliance according to the refrigerant quantity. The room size shall be calculated as per the criterion of 8g R600a per square metres.

For details of the refrigerant quantity, please refer to the manual.

-Do not start the appliance that has any damage. If any problems, please contact the dealer or service centre.

Advance Type:

1 .Take down the SCREW B which is fixing the COVER TOP FRONT and then COVER TOP FRONT. Pull out the wire inserts.

Take down COVER HINGE UPP R and fridge door. Take downd and fix SHAFT-HINGE to the opposite side of HINGE UPP. Take down

CAP HOLE TOP at COVER TOP FRONT and install it on the right of COVER TOP FRONT.

STOPPER DOOR

SCREW G

Preparing the appliance for use

1.Remove all the packing materials of the components, and do remove the foam pad under the refrigerator during the operation;

2.Clean the interior and exterior of the refrigerator with wet warm cloth (add little neutral detergent in the warm water).

3.the power plug can be connected around one hour after the refrigerator is positioned stable,please make the approciate operations with careful reference to the page of control panel introduction.

2.Take down SCREW A, SCREW E and MID HINGE of the fixing hinge and then freezer door. Take down CAP HINGE HOLE, CAP SCREW CABI and SCREW F at left and install them at right.

3.Gently incline the appliance in less than 45 degree, remove the right FOOT and unfasten SCREW D. Take down right HINGE LOW. Then take down FIX HINGE LOW,SHIFT HINGE and STOPPER HINGE LOW. Reverse STOPPER HINGE LOW and fix it to the left of HINGE LOW with

FIXER HINGE LOW and SHIFT HINGE.

4.Take down the left FOOT and unfasten SCREW D. Take down and fix REINF to the right. Then fix FOOT.

5.Take off the SCREW G and STOPPERDOOR in the freezer door and install them at the left of the door. Take off CAP HOLEDOOR, CAP SCREW HANDLE, SCREW C, HANDLE UPP, HANDLE BAR, HANDLE LOW, CAP HANDLE, and CAP SPACER DOOR, and install them at the right of the door. Install CAP HOLEDOOR on the left of the door.

6.Install the freezer's door, and fix MID HINGE with SCREW A and SCREW E. Fix the refrigerator's door with SCREW A and HINGE UP L.

7.Fix the wire inserts properly. Install COVER HINGE UPP L and cover it with COVER DOOR UPP.

8.Install COVER TOP FRONT and finally fasten SCREW B.

4

13

Image 5
Contents Instructions Manual Contents Parts Description FeaturesChanging the direction of the door openingRL34SC Safety PrecautionsPreparing the appliance for use Changing the direction of the door openingRL34EGInstallation Instructions Removing the AccessoriesPower Button Maintenance and CleaningRefrigerator Temperature Setting Control Panel RL34EG*, RL34ECControl Panel RL 34 EG*, RL 34EC Food storage instructionsTemperature Setting Temp.Control Malfunction Alarm Function Door Open Alarm functionPower Button Power Malfunction Alarm FunctionTechnical Parameters Electrical Diagram

RL34EC, RL34SG, RL34EG specifications

Samsung has established a strong reputation in the home appliance market, and its range of refrigerators, particularly the RL34EG, RL34SG, and RL34EC models, exemplifies innovation and practicality. These models have gained popularity for their robust features, sleek designs, and energy efficiency.

Starting with the Samsung RL34EG, this refrigerator boasts a spacious interior with a smart layout that maximizes storage efficiency. It features Samsung's All-Around Cooling technology, ensuring even temperatures throughout the fridge. This prevents hotspots and maintains the freshness of food items stored in various compartments. The model also includes a Digital Inverter Compressor, which intelligently adjusts its speed based on cooling demand, leading to reduced energy consumption and quieter operation.

Next, the Samsung RL34SG presents a stylish stainless-steel finish that enhances any kitchen aesthetic. Besides its visual appeal, the RL34SG incorporates an ice maker, providing a steady supply of ice for drinks and parties. The refrigerator features a Multi-Flow cooling system, distributing cool air evenly across all shelves, and preventing temperature fluctuations that can affect food quality. With a user-friendly digital display, users can easily monitor and adjust settings, ensuring optimal performance.

The RL34EC model takes the characteristics of its predecessors up a notch by incorporating advanced Cooling Technology. It features a Twin Cooling System that independently cools both the refrigerator and freezer sections. This technology helps to maintain humidity levels in the fridge, which prevents food from drying out while also keeping odors from the freezer compartment at bay. The RL34EC is also designed with energy efficiency in mind, earning high energy ratings that contribute to lower utility bills.

Across the board, all three models prioritize user convenience with features like adjustable shelving, a bright LED lighting system for better visibility, and a sleek design that maximizes space efficiency. Moreover, the eco-friendly materials and components used in their construction reflect Samsung's commitment to sustainability.

In summary, the Samsung RL34EG, RL34SG, and RL34EC refrigerators offer an impressive blend of technology, functionality, and style. Whether it’s the efficient cooling systems, user-friendly features, or energy-saving capabilities, these models are well-suited for modern households looking for reliable refrigeration solutions.