Samsung RS261M** Making mInor adjustments to the doors, setting up your side-by-side refrigerator

Page 16

Making mInor adjustments to the doors

setting up your side-by-side refrigerator

Making mInor adjustments to the doors

Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator.

When the door of the freezer is higher than the fridge

Adjustment part

In the case of the process to correct the imbalance is the same. Open the doors and adjust them, one at a time, as follows:

1. Unscrew the nut 1 from the lower hinge until it reaches the upper end of the bolt 2 .

3 Wrench

2 Bolt

1 Nut

When you release the nut 1 , make sure that you use the hex wrench provided 3 to loosen the

bolt 2 in a counter-clockwise direction. You should then be able to unscrew the nut

1with your fingers.

2.Adjust the height difference between the doors by turning the bolt 2 clockwise or counter

clockwise .

3 Wrench

2 Bolt

When you turn clockwise , the door will move up.

3.After adjusting the doors, turn the nut 1 clockwise bolt, then tighten the bolt again with the wrench 3

until it reaches the lower end of the to fix the nut in place 1 .

3 Wrench

2 Bolt

1 Nut

If you do not secure the nut firmly, the bolt may release.

16_ setting up

Image 16

Contents user manual please register your product atFree Standing Appliance Refrigeratorfeatures of your side-by-side refrigerator Key features of your new refrigeratorDoor Alarm Xtra SpaceTMsafety Information SAFETY INFORMATIONWARNING SEVERE WARNING SIGNS FOR INSTALLATION Important safety symbols and precautionsCAUTION CAUTION SIGNS for INSTALLATION WARNING SEVERE WARNING SIGNS for USINGCAUTION CAUTION SIGNS for USING WARNING SEVERE warning signs for DisPosaL CAUTION CAUTION SIGNS for CLEANING6 safety information contents seTTING UP yOUR sIDe-by-sIDeCLEANING AND MAINTAINING YOUR SIDE-BY-SIDE REFRIGERATOR RefRIGeRATORGetting ready to install the refrigerator setting up your side-by-side refrigeratorSelecting the best location for the refrigerator MODEL RS261MSETTING UP the refrigerator Installing the handles3. Match the upper and lower handle locking tabs on the doors to the handles SETTING UP the refrigeratorCONT’D Separating the water supply line from the refrigeratorReattaching the water supply line Removing the Front Leg CoverReattaching the freezer doors Removing the freezer doorTo reattach the freezer doors, replace parts in reverse order Reattaching the fridge door Removing the fridge doorTo reattach the fridge doors, replace parts in reverse order When the Freezer part is lower than the Fridge part When the Fridge part is lower than the Freezer partLEVELING the refrigerator Before leveling the refrigerator, remove the front leg coverMaking mInor adjustments to the doors When the door of the freezer is higher than the fridgeConnecting to the water supply line CHECKinG tHE wAtER DisPEnsER LinEinstALLinG tHE wAtER LinE Connecting the water line to the RefrigeratorCheck the amount of water supplied to the ice tray operating your side-by-side refrigerator CHECKING THE CONTROL PANELUSING THE CONTROL PANEL Freezer/Fridge Temperature adjustmentPower Freeze Power CoolUSING THE CONTROL PANELCONT’D Filter IndicatorWater Cubed Ice , Crushed IceUsing the ice and cold water dispenser Using the water dispenserUsing the ice dispenser To get colder waterStoring food 24 operatingStoring Food in the Freezer Storing Food in the FridgeWire Shelf Xtra Spacecleaning and maintaining your side-by- side refrigerator REMOVING THE FREEZER/FRIDGE ACCESSORIES1. Door Bin/Dairy Bin 2. ShelvesCLEANING THE REFRIGERATOR Cleaning the InteriorCleaning the Exterior Cleaning the rubber door sealsChanging the WATER FILTER water filter chart TROUBLESHOOTING appendixmemo memoContact SAMSUNG WORLD WIDE Ambient Room Temperature Limits