LEVELING REFRIGERATOR
About Leveling first.
NOTE
Making small adjustments between doors.
If the door of the freezer is lower than that of the | If the door of freezer is higher than that of the |
refrigerator. | refrigerator. |
Adjustment part | Adjustment part |
Please open the doors and adjust them as follows:
1) Release the nut (①) on the lower hinge until it reaches the upper end of the bolt (➁).
| When you release the nut (①), use enclosed hex wrench (➂) to turn the bolt(➁) in a slightly | |
NOTE | counterclockwise direction. This will enable you to loosen the nut (①) with your fingers. | |
|
| |
| ➂ WRENCH | ➂ WRENCH |
|
| |
➀ NUT |
| ➀ NUT | |
➁ BOLT | ➁ BOLT | ||
| |||
|
|
2)Please adjust the height difference between the doors by turning the bolt (➁) clockwise ( 
) or counter
clockwise ( 
).
When you turn clockwise ( 
), the door goes up.
NOTE
➂ WRENCH | ➂ WRENCH |
|
➁ BOLT | ➁ BOLT |
3)After adjusting the doors, the nut (①) turn clockwise ( 
) until it reaches the lower end of the bolt, then tighten the bolt again with the wrench (➂) to fix the nut(①).
➂ WRENCH | ➂ WRENCH |
➀ NUT | ➀ NUT | |
➁ BOLT | ||
➁ BOLT | ||
If you do not fix the nut (①)firmly, the bolt (➁) may be released. | ||
NOTE | 25 | |
INSTALLATION INSTRUCTIONS