REAttACHinG tHE REFRiGERAtoR DooRs
4. Connect the water line ( 5 ) and then insert a clip | 4 | 3 |
| ||
|
| |
on the coupler with pulling tube. Connect the one |
|
|
connector( 4 ) on left side door and two connectors |
|
|
( 3 ) at each side of the top cap. |
|
|
The clip is enveloped inside of the top cap.
5
3
PU G ESTTIN 01
The water line ( 5 ) must be fully inserted to the marked line to prevent CAUTION water leakage from the dispenser.
coupler
5.Position the Top Table ( 2 ) in place.
With a philips head screwdriver, insert and tighten the
3 screws into the Hinge Cover. With the door opened, reinsert the Hinge Cover cap ( 1 ) and close the doors.
When reattaching the hinge cover, make sure that the wires are not pressed or damaged by the hinge cover.
2
1
Setting Up _13