Samsung RSA1D***, RSA1Z***, RSA1U***, RSA1N***, RSA1S*** Severe Warning Signs,  safety information

Page 4

safety information

• In order to avoid the creation of a flammable gas-air mixture if a leak in the

WARNING refrigerating circuit occurs, the size of the room in which the appliance may be sited depends on the amount of refrigerant used.

•Never start up an appliance showing any signs of damage. If in doubt, consult your dealer.

•The room must be 1m3 in size for every 8g of R600a refrigerant inside the appliance.

•The amount of refrigerant in your particular appliance is shown on the identification plate inside the appliance.

•Please dispose of the packaging material for this product in an environmentally friendly manner.

•Pull the power plug out of the socket before changing the interior light of the refrigerator.

-Otherwise, there is a risk of electric shock.

SEVERE WARNING SIGNS

• Do not install the refrigerator in a damp place or place where it may come in contact with water. WARNING - Deteriorated insulation of electrical parts may cause an electric shock or fire.

•Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room heaters or other appliance.

•Allow sufficient space to install the refrigerator on a flat surface.

-If your refrigerator is not level, the internal cooling system may not work correctly.

•Do not plug several appliances into the same multiple power board. The refrigerator should always be plugged into its own individual electrical which has a voltage rating that matched the rating plate.

-This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.

•Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

-Damage to the cord may cause a short-circuit, fire and/or electric shock.

•Make sure that the power plug is not squashed or damaged by the back of the refrigerator.

•Do not bend the power cord excessively or place heavy articles on it.

-This constitutes a fire hazard.

•Have the power cord repaired or replaced immediately by the manufacturer or its service agent if power cord has become frayed or damaged.

•Do not use a cord that shows cracks or abrasion damage along its length or at either end.

•If the power cord is damaged, have it replaced immediately by the manufacturer or its service agent.

•When moving the refrigerator, be careful not to roll over or damage the power cord.

•Do not insert the power plug with wet hands.

•Unplug the refrigerator before cleaning and making repairs.

•Do not use a wet or damp cloth when cleaning the plug.

•Remove any foreign matter or dust from the power plug pins.

-Otherwise there is a risk of fire.

•If the refrigerator is disconnected from the power supply, you should wait for at least ten minutes before plugging it back.

•If the wall socket is loose, do not insert the power plug.

-There is a risk of electric shock or fire.

•The appliance must be positioned so that the plug is accessible after installation.

_ safety information

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Refrigerator Features of your new refrigerator Key features of your new refrigeratorCoolSelect Duo Optional Model # Serial #Safety information Safety Information safety information Severe Warning SignsRefer to relevant instructions Safety information Additional Tips for Proper Usage Contents Getting Ready to Install the Refrigerator Setting up your side-by-side refrigeratorSelecting the best location for the refrigerator Removing the Front Leg Cover Removing the Refrigerator DoorsSeparating the Water Supply Line from the Refrigerator Removing the freezer door Removing the Fridge Door Reattaching the refrigerator doors Reattaching the Freezer DoorReattaching the Fridge Door Reattaching the Water Supply Line Reattaching the Front Leg CoverWhen the Freezer door is higher than the fridge When the Freezer door is lower than the fridgeLeveling the refrigerator Making mInor adjustments to the doors When the door of the freezer is higher than the fridgeInstalling the water dispenser line Parts for water line InstallationConnecting to the water supply line Checking the Water Dispenser Line optionalAttach the filter lock stations Secure the filter in positionConnect the water line to the refrigerator Secure the water lineCheck the amount of water supplied to the ice tray. Optional Setting up the refrigerator Operating the Samsung side-by-side refrigeratorUsing the Control Panel Operating the RefrigeratorUsing the Digital Display Power FreezeControlling the temperature Filter IndicatorChild Lock Cubed Ice, Crushed Ice and turnning the Ice maker offUsing the Water Dispenser Using the ice and cold water dispenserDispensing ice Freezer Shelves and binsFridge Storing food Storing Food in the FreezerStoring Food in the Freezer Storing Food in the FridgeMeat Using the CoolSelect Duo OptionalVegetable Removing the Freezer Accessories Side for not being tilted,a shelf should be placedRemoving the Fridge Accessories Side-by-side refrigeratorCleaning the refrigerator Cleaning the InteriorCleaning the Exterior Cleaning the Rubber door sealsChanging the Interior Lights Changing the Interior Lights in the fridgeUsing the doors Changing the Interior Lights in the FreezerTroubleshooting Problem SolutionPage Memo Memo Question or Comments? Country Call Or Visit US Online AT

RSA1D***, RSA1S***, RSA1N***, RSA1U***, RSA1Z*** specifications

Samsung has consistently set the benchmark for innovative home appliances, and the RSA1 series of refrigerators exemplifies this dedication to quality and performance. The models RSA1Z***, RSA1U***, RSA1N***, RSA1S***, and RSA1D*** are designed to enhance kitchen aesthetics while ensuring superior functionality.

The RSA1 series features a sleek, modern design that effortlessly integrates into various kitchen styles. Each model is available in multiple color options, allowing consumers to choose one that complements their home decor. The large capacity of these refrigerators is particularly appealing for families and individuals who require ample storage space for their groceries.

One of the standout technologies in the RSA1 series is the multi-air flow system. This feature ensures consistent cooling throughout the refrigerator by distributing cold air evenly in every corner. This helps keep food fresher for longer periods and minimizes temperature fluctuations, which can affect food quality.

Additionally, all models in the RSA1 series are equipped with an advanced cooling system that includes a frost-free design. This minimizes the need for manual defrosting, making maintenance a breeze for busy households. The built-in water and ice dispenser is also a major highlight, providing chilled water and ice cubes at the touch of a button. This functionality is especially popular during summer months and for entertaining guests.

Energy efficiency is another priority for Samsung. The RSA1 series is designed with eco-friendly technology that reduces energy consumption. Many of these models are rated highly for energy efficiency, helping consumers save on utility bills while being mindful of their environmental impact.

The interior design of the RSA1 refrigerators is user-friendly, featuring adjustable shelves and bins that provide flexibility for organizing groceries. The vegetable and fruit drawers are designed to optimize freshness, allowing users to keep their produce crisp and vibrant.

Security is also a consideration in this series, with some models featuring a door alarm that alerts users if the refrigerator door is left ajar, helping to prevent energy wastage and spoilage of food.

In conclusion, the Samsung RSA1 series, with its advanced features and stylish design, represents an excellent choice for anyone looking to upgrade their kitchen appliances. With technologies that focus on efficiency, ease of use, and a commitment to food preservation, these models stand out as leaders in the market.
Top Page Image Contents