Samsung DA68-01890Q user manual Check the amount of water supplied to the ice tray

Page 21

Removing residual matter inside the water supply line after installing filter

1. Turn ON the main water supply.

2.Press the Water button and push the dispenser pad.

 

Refer to ‘Checking the control panel’ in the manual (page 22)

Ice

3.

 

Flush 3 gallons of water through the filter befor use.

 

 

(Flush approximately 6 minutes.)

 

 

This will clean the water supply system and remove air from the lines.

 

4.

Additional flushing may be required in some households.

 

5.Open the refrigerator door and make sure there are no water leaks coming from the water filter.

A newly installed water filter cartridge may cause water to briefly spurt from the water dispenser. This is due to air getting into the line. It should pose no problem to operation.

01 SETTING UP

Check the amount of water supplied to the ice tray.

1. Lift up the icemaker cover and gently pull it out.

2. When you press the Test button for 3 seconds, the ice cube container is filled with water from the water supply tap. Check to make sure the amount of water is correct(see the illustration below).

If the water level is too low, the ice cubes will be small. This is a water pressure problem from within the main water pipes, not the refrigerator.

1

Check the water level

 

Ice maker

2

 

 

 

 

Test button

 

• It will take a few minutes to reach the amount of water you want.

CAUTION

• Do not press the test button continuously when the tray is filled with ice or water.

 

 

 

Water may overflow or ice jamming may occur.

 

•When the bucket is not installed, the ice maker does not work.

•When ICE OFF blinks on the display panel, reinsert the bucket and/or make sure it’s installed properly.

setting up _21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Refrigerator KEY Features of Your NEW Refrigerator Safety Information Safety informationSafety information Safety information Safety information Safety information Safety information Contents When moving your refrigerator Getting Ready to Install the RefrigeratorModel Installing the handles Setting UP the RefrigeratorSetting up Separating the Water Supply Line from the Refrigerator Setting UP the REFRIGERATORCONT’DReattaching the Water Supply Line Tools you will needRemoving the freezer door Reattaching the freezer doorsTo ensure that it does not fall on you Reattaching the fridge door Removing the fridge doorLeve Ling the Refrigerator When the Fridge part is lower than the Freezer partWhen the door of the freezer is higher than the fridge Making Minor Adjustments to the DoorsChecking the Water Dispenser Line Connecting to the water supply lineConnecting the water line to the Refrigerator Installing the Water Dispenser LineCheck the amount of water supplied to the ice tray Nergy Saver Hold 3 sec for Child Lock Hecking the Contro L Pane LUsing the Control Panel Filter Indicator Using the Control PANELCONT’DWater Cubed Ice , Crushed IceUsing the water dispenser Using the ice dispenserSing the IC E AN D CO LD Water D is P Enser From those described in this manual Storing FoodDoor Bins Ice Maker BucketShelves DrawersRemoving the FREEZER/FRIDGE Accessories Cleaning and maintaining your side-by- side refrigeratorCleaning the Interior Cleaning the RefrigeratorCleaning the Exterior Cleaning the rubber door sealsChanging the Water Filter Appendix TroubleshootingSamsung Refrigerator 26 Cubic Feet and Larger Capacity WarrantySamsung Customer Care Center Contact Samsung World Wide Réfrigérateur Caracteristiques DE Votre Nouveau Refrigerateur Consignes DE Securite Consignes de sécuritéSafety information Consignes de sécurité Safety information Consignes de sécurité Safety information Sommaire Lorsque vous bougez votre réfrigérateur Avant D’INSTALLER Votre RefrigerateurModele Installation des poignées Installation DU RefrigerateurInstallation Déconnexion du tuyau d’alimentation d’eau du réfrigérateur Installation DU Refrigerateur SuiteRaccordement du tuyau d’alimentation d’eau Outils requisRemettre les portes du congélateur Retrait de la porte du congélateurRemettre la porte du réfrigérateur Retrait de la porte du réfrigérateurCalage DU Refrigerateur Derniers Reglages DES Portes Raccordement au tuyau d’alimentation en eau Verification DU Distributeur D’EAURaccordement du tuyau d’eau au réfrigérateur Installation DU Tuyau DU Distributeur D EAUVérifiez la quantité d’eau de l’appareil à glaçons Energy Saver Hold 3 sec for Child Lock Verification DU Panneau DE CommandesUtilisation DU Panneau DE Commandes Indicateur du filtre Utilisation DU Panneau DE Commandes SuiteEau Glaçons , Glace piléeUtilisation DU Distributeur DE Glacons ET D’EAU Froide Utilisation du distributeur d’eauUtilisation du distributeur de glaçons Différent de celui décrit dans ce manuel Conservation DE LA NourritureEtagères Bac de la machine à glaçonsTiroirs Compartiment laitierEtagères Congélateur /Réfrigérateur Retrait DES Accessoires DU CONGELATEUR/REFRIGERATEURNettoyage de l’intérieur Nettoyage DU RefrigerateurNettoyage de l’extérieur Nettoyage des joints de portesChangement DU Filtre a EAU Depannage AnnexeRefrigerateur Samsung Capacite DE 26 Pieds Cube ET Plus GarantieService Client Samsung Contactez Samsung World Wide

DA68-01890Q specifications

The Samsung DA68-01890Q is a versatile and efficient component designed for various applications in Samsung appliances, most notably in refrigerators. Its primary function is to ensure optimal performance and reliability, significantly enhancing the overall user experience.

One of the key features of the DA68-01890Q is its robust build quality, designed to withstand the rigors of daily use. This component is constructed to meet stringent quality standards, ensuring that it can handle temperature fluctuations and humidity changes commonly found in refrigeration environments. This durability translates into a longer lifespan, making it a reliable choice for consumers.

The DA68-01890Q utilizes advanced technology to improve energy efficiency. This characteristic is increasingly important in today’s eco-conscious world, where energy consumption is closely monitored. By optimizing the appliance’s energy use, the DA68-01890Q helps reduce electricity costs while contributing to a lower carbon footprint.

Additionally, this component is designed for easy installation and compatibility with various Samsung refrigerator models. This user-friendly aspect allows for straightforward replacements without the need for specialized tools or professional assistance, making it convenient for homeowners to maintain their appliances in peak condition.

Another significant feature of the DA68-01890Q is its role in the overall cooling system. It plays a critical role in maintaining consistent temperatures across the various compartments of the refrigerator. This is especially important for preserving food freshness, preventing spoilage, and extending the life of perishable items.

Moreover, the DA68-01890Q is equipped with advanced sensors that monitor temperature and humidity levels, providing real-time feedback to the main control system. This technology ensures that the refrigerator operates optimally, adjusting to any changes in the environment, which enhances food preservation.

In summary, the Samsung DA68-01890Q is a vital component that embodies reliability, energy efficiency, and advanced technology. Its robust construction, ease of installation, and contribution to optimal cooling make it an essential choice for users looking to enhance their Samsung refrigerator’s performance and longevity. Whether replacing a worn-out part or ensuring maximum efficiency, the DA68-01890Q is a dependable option that safeguards the quality of food while promoting energy savings.
Top Page Image Contents