Sharp SJ-24G operation manual Hints When Making ICE, Defrosting

Page 3

3. Connect the power plug to a 230/240 volt 10 amp power point.

NOTES

Keep your refrigerator out of direct sunlight.

Don’t place next to heat generating appliance.

HINTS WHEN MAKING ICE

1.Do not over fill the Ice cube tray; otherwise the ice cubes will be joined together when frozen.

2.To make ice cubes quickly, set the FREEZER temp. control to MAX.

NOTE

Reset the FREEZER temp. control back to its original position as soon as the ice cubes are made; otherwise the food in the refrigerator may freeze.

3.When the ice cubes are made, hold the Ice cube tray upside down whilst twisting either end in opposite directions, allowing the ice cubes to drop out.

DEFROSTING

Defrosting is fully automatic due to a unique energy saving system. Whereby the defrost cycle start time is proportional to the running time of your refrigerator compressor, i. e., the less time the refrigerator compressor operates (during the winter season or you’re away on holidays), the longer the time between each defrost cycle.

3

Image 3
Contents RATORFRFFrFR ‘ Refrigerator temperature adjustment Controlling TemperaturesInitial setup Temperature adjustmentsDefrosting Hints When Making ICETo remove Evaporating pan To set Evaporating pan Switching off your refrigeratorStorage For Best FreezingSharp Corporation Osaka, Japan