System Menu Options
Night Mode
In this mode, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching your favourite action movie without disturbing others at night.
➜On: Select this to level out the volume.This feature is only available for movies with Dolby Digital mode.
➜Off: Select this when you want to enjoy the surround sound with its full dynamic range.
TV Mode
Selects interlace or
➜P-SCAN and Interlace.
In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD player's Y Pb Pr jacks to your TV that supports the progressive video input. Otherwise, a distorted picture will appear on the TV. For proper progressive scan set up, see ÒGetting
English
Video Setup Page
The options included in Video Setup page are: ÒVideo OutputÓ, ÒTV ModeÓ and ÒColor SettingÓ.
Video Output
Sets the video output according to your video connection.This setting is not required if you are using the VIDEO OUTPUT jack (yellow) to connect the DVD micro system to your TV.
➜Pr/Cr Pb/CbY: Select this if you have connected the DVD micro system to your TV using Component video jacks.
➜
Color Setting
This menu helps you to set the video quality.
1Press 3 4 to highlight ÒColor SettingÓ.
2Press 2 or OK to enter Color Setting Setup.
The options included in Color Setting Setup page are: ÒSharpnessÓ,ÒBrightnessÓ, ÒContrastÓ, ÒGammaÓ,ÒHueÓ, ÒSaturationÓ and ÒLuma DelayÓ.
Sharpness
Adjusts the sharpness level.
➜High, Medium and Low.
Brightness
Adjusts the brightness level. Range:
Contrast
Adjusts the contrast level. Range:
Gamma
Adjusts the gamma level.
➜High, Medium, Low and None.
Hue
Adjusts the hue level. Range:
Saturation
Adjusts the saturation level. Range:
Luma Delay
Adjusts the luma delay.
➜0 T and 1 T.
33