CDA FW380 manual For Great Britain only Fuse replacement

Page 9

ELECTRICAL CONNECTION

1) For Great Britain only

Warning - this appliance must be earthed

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows:

1.Remove the fuse cover (A) and fuse (B).

2.Fit replacement 13A fuse into fuse cover.

3.Refit both into plug.

Important:

The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used until a correct replacement is fitted.

Correct replacement are identified by the colour insert or the colour embossed in words on the base of the plug. Replacement fuse covers are available from your local electrical store.

2) For the Republic of Ireland only

The information given in respect of Great Britain will frequently apply, but a third type of plug and socket is also used, the 2-pin, side earth type.

3) Socket outlet / plug (valid for both countries)

If the fitted plug is not suitable for your socket outlet, please contact Whirlpool Service for further instruction. Please do not attempt to change plug yourself. This procedure needs to be carried out by a qualified Whirlpool technician in compliance with the manufactures instructions and current standard safety regulations.

18

Image 9
Contents FW380 integrated under counter freezer Instructions for USE Before Using the Appliance Make sure that the appliance is not near a heat source Know Your Appliance Electrical Connection and Operation Production of ICE Cubes Maintenance and Cleaning For Great Britain only Fuse replacement Under Counters Min 40 mm 12 Ø 3,5 x Max + 70 mm Page 3,5 x Page Page N2 Ø 3,5 x Ø 3,5 x Page = 3 mm 820 870 820 100 ÷ 150 ÷ 100 + b 150 + b 820 136 186 135 Max 30 mm Page Page Page Page Page Customer Care Department 01949 862