Make sure the appliance is not near a heat source

PRECAUTIONS AND GENERAL RECOMMENDATIONS

•During installation, make sure the appliance does not damage the power cable.

•Make sure the appliance is not near a heat source.

•To guarantee adequate ventilation, leave a space on both sides and above the appliance and follow the installation instructions.

•Keep the appliance ventilation openings free.

•Power cable modification or replacement must only be carried out by qualified personnel.

•It must be possible to disconnect the appliance from the power supply by unplugging it or by means of a mains two-pole switch installed upstream of the socket.

•Make sure the voltage indicated on the appliance rating plate corresponds to that of your home.

•For the water connection, use the pipe supplied with the new appliance; do not reuse that of the previous appliance.

•Install and level the appliance on a floor strong enough to take its weight and in a place suitable for its size and use.

•The appliance must be handled and installed by two or more persons.

•Be careful not to damage the floors when moving the appliance (e.g. parquet).

•Do not use single/multi-adapters or extension cords.

•Install the appliance in a dry and well-ventilated place. The appliance is arranged for operation in places where the temperature comes within the following ranges, according to the climatic class given on the rating plate. The appliance may not work properly if it is left for a long period at a temperature outside the specified range.

Climatic Class	Amb. T. (°C)	Amb. T. (°F)
SN	From 10 to 32	From 50 to 90

N	From 16 to 32	From 61 to 90
ST	From 16 to 38	From 61 to 100

T	From 16 to 43	From 61 to 110

•Do not store or use petrol, gas or flammable liquids in the vicinity of this or other electrical appliances. The fumes can cause fires or explosions.

•Do not use mechanical, electric or chemical means other than those recommended by the Manufacturer to speed up the defrost process.

•Do not damage the appliance refrigerant circuit pipes.

•Do not use or place electrical appliances inside the product if they are not of the type expressly authorised by the Manufacturer.

•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they don't play with the appliance.

•Do not swallow the contents (non-toxic) of the ice packs (if provided).

•Use the refrigerator compartment only for storing fresh food and the freezer compartment only for storing frozen food, freezing fresh food and making ice cubes.

•Do not store liquids in glass containers in the freezer compartment since they may burst.

•Do not eat ice cubes or ice lollies immediately after taking them out of the freezer since they may cause cold burns.

•Before carrying out any maintenance or cleaning operation, unplug the appliance or disconnect the power supply.

•All appliances equipped with an ice-maker and water dispenser must be connected to a water supply that delivers drinking water only (with mains water pressure of between 0.17 and 0.81 Mpascals (1.7 and 8.1 bar)). Ice-makers and/or water dispensers not directly connected to the water supply must be filled with drinking water only.

•The Manufacturer declines any liability if the above advice and precautions are not respected.

FW550 specifications

The CDA FW550 is a high-performance built-in wine cooler designed to elegantly fit into modern kitchens while providing optimal storage conditions for wine enthusiasts. This wine cooler accommodates an impressive number of bottles, making it an ideal addition for both casual drinkers and serious collectors.

One of the standout features of the CDA FW550 is its dual temperature zones. This means that the cooler can hold both red and white wines at their ideal serving temperatures, ensuring that every bottle is ready to enjoy. The two compartments can be independently controlled, allowing users to set different temperatures according to their preferences.

The design of the FW550 is sleek and sophisticated, often featuring a stainless steel frame and a UV-protected, tempered glass door. This not only enhances its aesthetics but also minimizes exposure to harmful UV rays that can adversely affect the quality of wine. The interior is equipped with wooden shelves that provide a stable, vibration-free environment, crucial for preserving the delicate flavors and aromas of the wine.

In terms of technology, the CDA FW550 utilizes advanced cooling systems that ensure consistent temperature and humidity levels. This is essential for the long-term aging of fine wines. The cooler also incorporates low-energy LED lighting, which both illuminates the bottles and reduces energy consumption, adding to its eco-friendly credentials.

Another key characteristic of this wine cooler is its whisper-quiet operation. The unit is designed with sound-dampening technology, ensuring it operates quietly without causing disturbances in the kitchen or living area.

User-friendly digital controls allow for easy temperature adjustments and settings, making it accessible even for those who may not be tech-savvy. Additionally, the CDA FW550 is built to fit seamlessly with cabinetry, providing a built-in look that maintains the kitchen’s clean lines and overall design.

In summary, the CDA FW550 wine cooler is a perfect blend of style and functionality. With its dual temperature zones, advanced cooling technology, energy-efficient design, and sleek appearance, it caters to the needs of wine lovers while enhancing the aesthetics of any kitchen.