Philips MCB204 user manual Troubleshooting, Check the speaker connections and location

Page 23

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

English

Problem

NO DISC” is displayed.

Radio reception is poor.

Recording or playback cannot be made.

The tape deck door cannot open.

The system does not react when buttons are pressed.

Sound cannot be heard or is of poor quality.

The left and right sound outputs are reversed.

The remote control does not function properly.

Solution

Insert a disc.

Check if the disc is inserted upside down.

Wait until the moisture condensation at the lens has cleared.

Replace or clean the disc, see “Maintenance”.

Use a finalized CD-RW or a correct MP3-CD format disc.

If the signal is too weak, adjust the antenna or connect an external antenna for better reception.

Increase the distance between the Mini HiFi System and your TV or VCR.

Clean deck parts, see “Maintenance”.

Use only NORMAL (IEC I) tape.

Apply a piece of adhesive tape over the missing tab space.

Remove and reconnect the AC power plug and switch on the system again.

Remove and reconnect the AC power plug and switch on the system again.

Adjust the volume.

Disconnect the headphones.

Check that the speakers are connected correctly.

Check if the stripped speaker wire is clamped.

Make sure the MP3-CD was recorded within

32-256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz.

Check the speaker connections and location.

Select the source (CD or TUNER, for example) before pressing the function button (É,í,ë).

Reduce the distance between the remote control and the system.

Insert the batteries with their polarities (+/– signs) aligned as indicated.

Replace the batteries.

Point the remote control directly towards the IR sensor.

23

Image 23
Contents Micro Hi-Fi System Copyright in the U.K How to connect a plugImportant notes for users in the U.K Mains plugPage Listen for reasonable periods of time Listen at a moderate volumeTo establish a safe volume level Contents Environmental Information Supplied accessoriesSafety Information General InformationDAB Broadcasters and DLS What is a multiplex?About Digital Audio Broadcasting DAB Antenna Connection PowerPreparations Rear connectionsThen select the desired function for example Before using the remote controlReplacing battery lithium CR2025 into the remote control Pull out the plastic protective sheetControls on the system and remote control Basic Functions Switching the system onPower-saving automatic standby Adjusting volume and soundPlaying an MP3 disc CD/MP3 OperationLoading a disc Basic playback controlsReviewing the programme Different play modes ShuffleProgramming track numbers RepeatDAB Reception Tuning to DAB for the first timeRe-tuning Manual tuningBps Time Station 12B 225.64 MHz Tuning to preset DAB stationsDAB information display Programming DAB stationsProgramming radio stations Tuning to radio stationsTuning to preset radio stations FM Radio ReceptionRDS Programme types Setting the RDS clockScrolling through different RDS information Synchro start CD recording Tape Operation/RecordingTape playback General information on recordingExternal Sources Using a non-USB deviceUsing a USB mass storage device Press 2 on your MCB204 to start play Press ALBUM/PRESET 4/3 ALB +Tuning 4 ¢ or ¡ / to select the desired album and track Playing a USB mass storage deviceActivating and deactivating Clock/TimerSetting the clock Setting the timerMaintenance SpecificationsCheck the speaker connections and location TroubleshootingIt is not set in the USB mode. Press USB to select USB mode Meet Philips at the Internet
Related manuals
Manual 4 pages 17.06 Kb

MCB204 specifications

The Philips MCB204 is a compact and versatile LED ceiling light ideal for both residential and commercial spaces. Designed with an emphasis on energy efficiency and modern aesthetics, the MCB204 offers excellent illumination while being environmentally friendly.

One of the standout features of the Philips MCB204 is its impressive energy efficiency. Utilizing LED technology, this light source consumes significantly less power compared to traditional lighting solutions, which translates to lower energy bills and a reduced carbon footprint. The MCB204 provides a luminous efficacy that ensures bright and even lighting throughout the room, enhancing visibility and ambiance.

The MCB204 is crafted with a sleek, minimalist design that fits seamlessly into various interior styles. Its low-profile form factor allows it to blend effortlessly into ceilings, making it an ideal choice for spaces with low headroom. Additionally, the fixture is lightweight and easy to install, which simplifies the upgrade or replacement of existing light fixtures.

In terms of performance, the Philips MCB204 boasts an excellent color rendering index (CRI), ensuring that colors appear true and vibrant under its light. This is particularly beneficial in settings such as art galleries, showrooms, or residential kitchens, where accurate color representation is essential. The cool daylight color temperature provides an inviting ambiance, enhancing productivity in workspaces and creating a pleasant atmosphere in living areas.

Moreover, the Philips MCB204 is durable and designed for longevity. Its robust construction ensures that it can withstand the rigors of everyday use, coupled with a substantial lifespan typical of LED lighting, which can exceed 25,000 hours. This longevity not only reduces maintenance costs but also minimizes waste, aligning with sustainability goals.

The MCB204 is also equipped with advanced thermal management technology, which helps to dissipate heat efficiently, allowing for optimal performance over extended periods. This feature not only enhances the fixture's durability but also maintains a consistent light output.

In summary, the Philips MCB204 is an excellent choice for anyone seeking a reliable, energy-efficient, and aesthetically pleasing lighting solution. With its combination of innovative technology, durability, and modern design, the MCB204 continues to be a top pick for illuminating various environments while prioritizing energy conservation and sustainability.