• To cycle through the alphanumeric characters that are available, press a button repeatedly.
• To delete the last character entry from the display, press CLEAR.
This chapter shows you how to create a wireless connection to a home network with static IP address.
1 Ensure that your encryption key (if required) is available.
2 Turn on your wireless access point or wireless router with broadband Internet.
3 Turn on Wireless Micro
4 On Wireless Micro
5 Select [Settings] < [Network] >
[Wireless] and confirm.
6 Select the network from the list in the display.
• Enter encryption key with the remote control, then press OK / to continue (if required).
7 Select [Static] and confirm.
8 Enter the static IP address with the remote control and confirm.
9 Select (Apply settings?) [Yes] and confirm.
»» Wireless Micro
Create wired connection with automatic IP address
This is how to navigate and select with the remote control:
•Press or to select a menu option.
•Press to confirm a selection.
•Press to go back to the previous screen.
•Press HOME to go to the Home menu. The alphanumeric buttons of the remote control are
• | To select a number or an alphanumeric |
|
| ||
| character, press a button once or more | lish |
| until you see the number or alphabetic | |
| character in the display of Wireless Micro | Eng |
|
| |
• | To cycle through the alphanumeric |
|
| ||
| characters that are available, press a |
|
| button repeatedly. |
|
• | To delete the last character entry from |
|
| the display, press CLEAR. |
|
| This chapter shows you how to create |
|
| a wired connection to a home network |
|
1 | with automatic IP address. |
|
Use an Ethernet cable (sold separately) to |
| |
| connect Wireless Micro |
|
| the access point or router that connects |
|
| to your home network with broadband |
|
2 | Internet access. |
|
Turn on your wireless access point or |
| |
3 | wireless router with broadband Internet. |
|
Turn on Wireless Micro |
| |
4 | On Wireless Micro |
|
5 | MENU. |
|
Select [Settings] > [Network] > [Wired] |
|
> [Automatic] > (Apply settings?) [Yes] and confirm.
»» Wireless Micro
Create wired connection with static IP address
This is how to navigate and select with the remote control:
• Press or to select a menu option.
•Press to confirm a selection.
• Press to go back to the previous screen.
•Press HOME to go to the Home menu. The alphanumeric buttons of the remote control are
•To select a number or an alphanumeric character, press a button once or more
EN 11