Amana MVH320W, MVH320E, MVH220E, MWT4461WW, MVH120E, MVH220W, MWT4461D

1.Find studs, using one of following methods:

•Stud finder--magnetic device which locates nails.

•Use hammer to tap lightly across mounting surface

to find solid sound. This will indicate stud location.

Note: After locating stud or studs, stud center can be found by probing wall with small nail to find edges of stud. Place mark halfway between edges. Center of any adjacent stud should be 16 inches or 24 inches from mark.

2.Draw line down middle of studs. Microwave must be connected to at least one wall stud.

3.Draw vertical line on wall, at center of 30 inch wide space.

4.Use mounting plate as template for rear wall. Place mounting plate on wall, verify tabs are against bottom of cabinet. Line up notch and center line on mounting plate to center line on wall.

5.While holding mounting plate with one hand, draw circles on wall at holes A and B, marked on mounting plate. See diagram below. Holes A and B are shown by arrows stamped into mounting plate and must be used for mounting. If holes are not used, improper installation will occur. Use toggle bolts through these holes unless one lines up with stud. Use wood screw for stud. Set mounting bracket aside.

6.Draw third circle through one of top or bottom holes to match location of stud.

NOTE: For outside back exhaust, microwave oven requires rear wall cutout opening for rear wall duct. See "Preparing Rear Wall Cutout Opening for Outside Back Exhaust" section.

7.Drill holes through circles. Diameter of holes should be 5/8 inch for toggle bolts and 3/16 inch for wood screws on studs. Use at least 1 wood screw in stud, and 2 toggle bolt assemblies into drywall or plaster.

8.Attach mounting plate to wall.

9.Remove toggle assembly from screws. Insert screws into mounting plate and replace toggle assembly to 3/4 inch past screw ends. Insert toggle assembly into holes in wall to mount bracket. Pull forward on bracket to tighten toggle bolts.

If installation is other than outside back exhaust, proceed to step F.

E. Preparing Rear Wall Cutout Opening for Outside Back Exhaust

1.Place mounting plate against rear wall, as described in diagram at left.

2.Using pencil, draw dots through holes D and E, and in tips of notches G and F. Mark straight edges of H and I for bottom line. This will give location and size of box cutout for rear wall duct.

3.Verify exhaust adaptor (with damper) is squared up in house duct and lines up with holes in mounting plate.

4.Attach 28 inch foam tape to front of mounting plate, around both exhaust openings where it will touch microwave oven.

NOTE: Exhaust must be aligned within space between studs.

MVH320W, MVH320L, MWT4461D, MVH220W, MVH120E specifications

The Amana MVH320E, MVH220E, MWT4461WW, MVH120E, and MVH220W are a line of capable microwaves offering versatility and convenience for modern kitchens. Each model has its own set of features and specifications, catering to different cooking needs and preferences.

The Amana MVH320E is well-known for its spacious interior, providing up to 1.6 cubic feet of cooking space. It features a powerful 1,000 watts of cooking power, making it efficient for reheating and cooking a variety of dishes. Its sensor cooking technology automatically adjusts cooking time and power levels for optimal results, taking the guesswork out of preparing meals. The sleek design and easy-to-use digital controls add to its appeal, offering multiple cooking presets that simplify the process for users.

Next is the MVH220E, which emphasizes user-friendliness with its simple button interface. Sporting a compact design, it fits well in smaller kitchens without sacrificing functionality. With 900 watts of cooking power, it efficiently handles reheating tasks and cooking simple meals. This model also includes a turntable for even cooking and a variety of quick-set cooking options, enhancing the overall experience.

The MWT4461WW stands out with its stylish white finish and 1.6 cubic feet of cooking space. This model is equipped with 1,000 watts of power and features multiple cooking presets, allowing for convenient one-touch cooking. The unit’s easy-clean interior helps maintain hygiene, and its microwave cooking technology ensures even heating throughout.

The MVH120E is tailored for those with limited space but still looking for great features. This model boasts 1.2 cubic feet of cooking capacity and 1,200 watts of power, making it one of the more powerful options in a compact design. It includes a variety of cooking settings and a convenient timer, which helps ensure perfect results every time.

Finally, the MVH220W offers a classic design with a white finish, combining aesthetics with functionality. Like its counterparts, it has 900 watts of cooking power and 1.6 cubic feet of space. The model includes features for rapid reheating and defrosting, enabling seamless meal preparation.

In summary, Amana’s range of microwaves, including MVH320E, MVH220E, MWT4461WW, MVH120E, and MVH220W, are designed with the consumer in mind. They each provide valuable features, including cooking power, sensor technology, and user-friendly controls, catering to the diverse needs of modern kitchens. Whether for a small family or larger gatherings, these microwaves deliver quality and convenience.