Philips MC-10 Tuning to radio stations, Programming radio stations, Tuning to preset stations

Tuner
English					2 Press PROGRAM on the system or remote
						control for more than 2 seconds to activate
STANDBY	TUNER		TIMER	PROGRAM		programming.
		PROGRAM
ON						➜ AUTO is displayed and available stations are
SOURCE				TIMER		programmed in order of waveband reception
SELECT				ON•OFF
DBB	DSC	INCREDIBLE SURR.				strength: FM followed by MW and LW.The last
						preset automatically stored will then be played.
INTERACTIVE SOUND
				VOLUME		Manual programming
iR SENSOR	STOP	PRESET	PLAY•PAUSE	RDS
				CLOCK	1	Tune to your desired station (see Tuning to radio
REPEAT	PREV	TUNING	NEXT	SHUFFLE		stations).
BAND
					2 Press PROGRAM on the system or remote
						control to activate programming.
						➜ PROGRAM flashes in the display.

Tuning to radio stations

1 Select TUNER source.	3	Press PRESET 4 or 3 (¡ or ™ on the remote
		control) to allocate a number from 1 to 40 to
➜ TUNER is displayed briefly.		this station.
2 Press BAND once or more to select your	4	Press PROGRAM again to confirm the setting.
waveband.
		➜ PROGRAM disappears, the preset number and
3 Press down on TUNING à or á and release		the frequency of the preset station are shown.
button.	5	Repeat the above four steps to store other
➜ The radio automatically tunes to a station
		stations.
with sufficient reception. Display indication during
	¶ You can override a preset station by storing
automatic tuning: SEARCH.
➜ If a FM station is received in stereo, STEREO is		another frequency in its place.

shown.

4Repeat step 3 if necessary until you find the desired station.

¶To tune to a weak station, press TUNING à or á briefly and repeatedly until you have

found optimal reception.

Programming radio stations

You can store up to a total of 40 radio stations in the memory.

Automatic programming

Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden.The system will only programme stations which are not in the memory already.

1Press PRESET 4 or 3 ( ¡ or ™ on the remote control) to select the preset number where programming should start.

Note:

– If no preset number is selected, default is preset

(1) and all your presets will be overridden.

Tuning to preset stations

¶Press PRESET 4 or 3 ( ¡ or ™ on the remote control) until the desired preset station is displayed.

RDS (some versions only)

Radio Data System is a service that allows FM stations to show additional information. If

you are receiving a RDS station, and the station name are displayed.

When automatic programming is used, RDS stations will be programmed first.

Scrolling through different RDS information

¶Press RDS briefly and repeatedly to scroll through the following information (if available):

–Station name

–Programme type such as NEWS, SPORT, POP M ...

–Radio text messages

–Frequency

14

pg 001-020/MC10/22-Eng 14 12/7/00, 1:29 PM 3140 115 27752