 Installing Your Unit,  Electrical Connection

Installing Your Unit

•This appliance is designed to be free standing only, and should not be recessed or built-in.

•Place your unit on a floor that is strong enough to support the unit when it is fully loaded. To level your unit, adjust the leveling legs at the bottom of the unit.

•Allow 5 inches of space between the back and sides of the unit, which allows the proper air circulation to cool the compressor and condenser.

•Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

•Avoid locating the unit in moist areas.

•Plug the unit into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

•After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing food in the refrigerator compartment.

Electrical Connection

Warning

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center.

This unit should be properly grounded for your safety. The power cord of this unit is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock.

Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded.

This unit requires a standard 115/120 Volt AC ~/60Hz electrical outlet with three-prong ground. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The cord should be secured behind the unit and not left exposed or dangling to prevent accidental injury.

The unit should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the unit by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the unit, be careful not to damage the power cord.

Extension Cord

Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this unit. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

BCA193BG specifications

The Avanti BCA193BG is an innovative compact refrigerator that combines style, functionality, and advanced features to cater to modern living needs. Designed primarily for those who appreciate both convenience and aesthetics, this refrigerator is well-suited for small apartments, dorm rooms, or as a supplemental cooling unit in larger homes.

One of the standout features of the Avanti BCA193BG is its impressive storage capacity given its compact dimensions. With a total capacity of 1.9 cubic feet, it offers ample space for beverages, snacks, and perishable items. The interior is thoughtfully designed, featuring adjustable shelves that allow users to customize the layout according to their storage needs. This versatility ensures that both tall bottles and small containers can easily fit.

The refrigerator operates quietly, thanks to its efficient compressor technology, making it an ideal choice for bedrooms or study areas. Its energy-efficient design means users can enjoy substantial savings on electricity bills, all while being environmentally conscious. The unit is also equipped with a reversible door, allowing for flexible placement in various room layouts.

In terms of design, the Avanti BCA193BG boasts a sleek black finish that adds a touch of sophistication to any space. The elegant exterior is complemented by a clean, easy-to-use control panel, which allows users to set the desired temperature with precision. The unit also features a built-in light that illuminates the interior, making it easy to find items even in low light conditions.

For added convenience, it includes a separate freezer compartment, providing an extra layer of functionality for freezing items or storing ice. The adjustable thermostat allows users to control the temperature easily, ensuring food is kept at optimal freshness levels.

Overall, the Avanti BCA193BG is a compact refrigerator that excels in performance and design. Its combination of sufficient storage space, energy efficiency, and user-friendly features make it a versatile choice for anyone looking to enhance their kitchen or living area without compromising on style or functionality. Whether used as a primary refrigerator in a small home or as an additional unit, it is designed to meet the demands of today’s lifestyle while delivering reliability and convenience.