Avanti EWC1802DZ manual Care and Maintenance,  Setting the Temperature Control

Page 8

SETTING THE TEMPERATURE CONTROL

You can set the temperature for each zone (Upper and Lower) as you desire by pushing the UP or DOWN button on the control panel for each zone. The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN button once.

When you store mostly red wines, the temperature which you control by pushing the above two buttons need to be set at between 15º - 19ºC (58º - 64ºF).

When you store mostly white wines, the temperature needs to be set at between 9º - 14ºC (48º - 54ºF).

NOTE:

When you use the wine chiller for the first time or restart the wine chiller after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LCD readout. This is normal and it is due to the length of the activation time. Once the wine chiller is running for a few hours everything will be back to normal.

Storage Capacity

NOTE: You can place 18 standard bottles in this wine chiller.

Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able to store may vary. Bottle capacities are approximate maximums when storing traditional Bordeaux 750ml bottles and include bulk storage.

Interior Light

The light switch is located in the upper right hand side of the inner compartment. You can turn the interior light ON or OFF by sliding the switch from left to right or vice versa.

CARE AND MAINTENANCE

Cleaning Your Wine Chiller

UNPLUG the Wine Chiller, and remove all items including shelves.

Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.

Wash the shelves with a mild detergent solution.

Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.

Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.

Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless steel with steel particles and rusting may occur.

CAUTION

Failure to unplug the Wine Chiller could result in electrical shock or personal injury.

Power Failure

Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your contents.

8

Image 8
Contents Avanti Products LLC Box 520604 Miami, Florida Manual DE InstruccionesModel Number / No. de Modelo Table of Contents If YOU Need Service Avanti Customer ServiceHelp US Help YOU Read this guide carefullyParts & Features  Installation of Your Wine Chiller Installation Instructions Before Using Your Wine Chiller  Surge Protector  Electrical Connection Extension Cord Operating Your Wine Chiller Care and Maintenance  Setting the Temperature ControlTroubleshooting Guide Problem Possible CauseService for Your Wine Chiller Wiring DiagramYour Avanti Products Warranty Instrucciones DE Seguridad Atencion Aviso Control DE TemperaturaControl de temperatura Cuidado Y Mantenimiento How Did You Learn About This Product  Promote better productsIs This Product Used EWC1802DZ VER 2.0