Important Safety Instructions

WARNING

To reduce the risk of fire, electrical shock, or injury when using your refrigerator, follow these basic precautions:

•Read all instructions before using the refrigerator.

•DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

•Before you throw away your old refrigerator: Take off the door. Leave the shelf in place so that children may not easily climb inside.

•Never allow children to operate, play with, or crawl inside the refrigerator.

•Never clean refrigerator parts with flammable fluids. The fumes can create a fire hazard or explosion.

•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other refrigerator. The fumes can create a fire hazard or explosion.

•Do not repair or replace any part of the refrigerator or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions. Replace the fuse with the same type.

-Save these instructions-

INSTALLATION INSTRUCTIONS

¾Before Using Your Refrigerator

•Remove the exterior and interior packing.

•Check to be sure you have all of the following parts:

•1 Shelf

•1 Instruction manual

•Clean the interior surface with lukewarm water using a soft cloth.

¾Installing Your Refrigerator

•This refrigerator uses thermoelectric refrigeration technology (no compressor) and is not designed for storage in hot areas like garages, warehouses or outdoors since it is designed to operate at an average of 30 degrees below the ambient temperature of (75º-78ºF / 24º- 26ºC).

•This appliance is designed to be free standing only, and should not be recessed or built-in (Fully recessed).

•Place your refrigerator on a floor that is strong enough to support the refrigerator when it is fully loaded.

•Allow 5 inches of space between the back and sides of the refrigerator, which allows the proper air circulation to cool the heat sink.

•Locate the refrigerator away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the refrigerator not to perform properly.

•Avoid locating the refrigerator in moist areas.

•Plug the refrigerator into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

•After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing food in the refrigerator compartment.

EC151SS, EC150B specifications

The Avanti EC150B and EC151SS are compact and efficient countertop ice makers designed to meet diverse consumer needs while providing high-performance capabilities. Tailored for both home and small-scale commercial use, these models stand out due to their user-friendly features and innovative technologies.

One of the central characteristics of both the EC150B and EC151SS is their ability to produce high-quality bullet ice rapidly. The EC150B can generate approximately 28 pounds of ice per day, while the EC151SS is slightly more robust, capable of producing around 48 pounds daily. Each model features a generous ice storage capacity, allowing users to enjoy a surplus of ice for parties, gatherings, or everyday use without frequent interruptions to refill or harvest ice.

Both ice makers come equipped with intuitive controls and clear indicator lights, simplifying the operation process. With their straightforward design, users can effortlessly choose their desired ice production levels and monitor the device's status. Additionally, the self-cleaning feature is a significant attribute, ensuring that maintenance is minimal and that the ice produced remains clean and fresh.

In terms of design, the EC150B showcases a sleek black exterior, while the EC151SS boasts a modern stainless steel finish. Both models are aesthetically pleasing and compactly designed to fit easily on kitchen countertops, making them an ideal addition to any kitchen space without requiring extensive real estate.

The technologies integrated into these ice makers include advanced compressor systems that ensure quiet operation and efficient cooling. Both units are also designed with energy efficiency in mind, helping to minimize electricity consumption while maintaining optimal performance.

In summary, the Avanti EC150B and EC151SS ice makers are excellent choices for anyone seeking reliable, efficient, and stylish ice-making solutions. With their exceptional ice production capabilities, user-friendly features, and modern designs, these models provide an ideal blend of functionality and convenience, making them perfect for both personal use and small businesses looking to enhance their ice supplies.