Avanti BCA5003PS instruction manual Important Safety Instructions, Installation Instructions

Page 7

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical shock, or injury when using your refrigerator, follow these basic precautions:

•Read all instructions before using the refrigerator.

•DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

•Before you throw away your old refrigerator or freezer: Take off the doors. Leave the shelves in place so that children may not easily climb inside.

•Never allow children to operate, play with, or crawl inside the refrigerator.

•Never clean refrigerator parts with flammable fluids. The fumes can create a fire hazard or explosion.

•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other refrigerator. The fumes can create a fire hazard or explosion.

-Save these instructions-

INSTALLATION INSTRUCTIONS

Before Using Your Refrigerator

•Remove the exterior and interior packing.

•Check to be sure you have all of the following parts:

•2 Tempered Glass Shelves

•1 Tempered Glass Crisper Cover

•1 Crisper

•1 Instruction manual

•Before connecting the refrigerator to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

•Clean the interior surface with lukewarm water using a soft cloth.

Installing Your Refrigerator

•This appliance is designed to be free standing only, and should not be recessed or built-in.

•Place your refrigerator on a floor that is strong enough to support the refrigerator when it is fully loaded. To level your refrigerator, adjust the leveling leg at the bottom of the refrigerator.

•Allow 5 inches of space between the back and sides of the refrigerator, which allows the proper air circulation to cool the compressor and condenser.

•Locate the refrigerator away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the refrigerator not to perform properly.

•Avoid locating the refrigerator in moist areas.

•Plug the refrigerator into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

•After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing food in the refrigerator compartment.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual DE Instrucciones Table of Contents Your safety and the safety of others are very important Refrigerator SafetyImportant Safeguides Read this guide carefully Help US Help YOUParts & Features Installation Instructions Important Safety InstructionsWarning Operating Your RefrigeratorReversing the Door Swing of Your Appliance Care and MaintenanceProblems with Your Refrigerator Troubleshooting GuideAvanti Products Customer Services Service for Your RefrigeratorWhat is not Covered WarrantyInstrucciones EN Español SI Usted SE Muda Cuidados EN LOS Periodos DE AusenciaEconomia DE Energia SI Usted SE VA DE Vacaciones Promote better products Registration Information

BCA5003PS specifications

The Avanti BCA5003PS is a compact yet highly efficient ice maker that brings convenience and speed to your kitchen or entertainment area. Designed with functionality in mind, this ice maker is perfect for homes, offices, parties, or any setting where ice is needed quickly and in abundance.

One of the standout features of the Avanti BCA5003PS is its impressive ice-making capacity. It can produce up to 28 pounds of clear, restaurant-quality bullet ice in a 24-hour period, ensuring you won’t run out of ice during gatherings or summer barbecues. The ice-making cycle takes only about 6–15 minutes, allowing you to get fresh ice at a moment’s notice.

This model is designed for user-friendliness, featuring a simple control panel that allows you to easily monitor and manage the ice-making process. The large 2.5-liter water reservoir ensures continuous operation, while the removable ice basket provides easy access to the freshly made ice. Additionally, the unit is equipped with an automatic shut-off feature that stops ice production when the basket is full, preventing overflows and making it even easier to manage.

The Avanti BCA5003PS is compact and stylish, fitting seamlessly into modern kitchens or serving areas. Its sleek stainless-steel finish adds a touch of elegance, while its small footprint ensures it can be placed on countertops or in small spaces without difficulty. This versatility makes it a great addition to both residential and commercial environments.

In terms of technology, the Avanti BCA5003PS utilizes a powerful compressor and fan system for rapid cooling, ensuring that the ice production process is efficient and reliable. This means not only is the ice produced quickly, but it also remains solid for longer periods, making it ideal for both immediate use and storage.

The Avanti BCA5003PS performs exceptionally well across a variety of conditions, adapting to changes in temperature and humidity, making it suitable for indoor and outdoor use. Its durability is backed by quality materials and engineering, ensuring that this ice maker is a long-lasting investment for ice enthusiasts.

In summary, the Avanti BCA5003PS is a must-have appliance for those who prioritize convenience, efficiency, and quality. With its impressive ice production capabilities, user-friendly design, and stylish appearance, it is well-equipped to meet all your ice needs without compromising on performance.
Top Page Image Contents