Avanti RM4551B-2 Operating Your Unit, Care and Maintenance,  Setting the Temperature Control

Page 10

OPERATING YOUR UNIT

Setting the Temperature Control

•Your unit has only one control for regulating the temperature in the compartment. The temperature control is located on the upper right hand side of the compartment.

•The first time you turn the unit on, set the temperature control to “5.”

•The range of the temperature control is from position "0” to “5”. After 24 to 48 hours, adjust the temperature control to the setting that best suites your needs. The setting of “3” should be appropriate for home or office use.

•To turn the appliance off, turn the temperature control to ”0”.

NOTE:

Turning the temperature control to “0” position stops the cooling cycle but does not shut off the power to the unit.

If the unit is unplugged, has lost power, or is turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the unit will not start.

Using Your Ice Cube Tray

•Recommended thermostat setting for ice making is position 5.

•Fill the ice cube tray (two thirds of it) with cold water or with any liquid suitable for freezing and place the tray on the bottom of the chiller compartment to freeze properly.

•Dry the tray, otherwise it may stick to the bottom of the chiller.

•The best method to get ice cubes out of the tray is to hold the tray under cold tap water for a second.

•To eject the ice cubes from the tray, place over the ice bucket and twist slightly

The Chiller Compartment

•This compartment is designed for production of ice cubes and short-term storage (3-4 days at most) pf some commercially frozen foods.

•The temperature in this compartment does not get cold enough to freeze food safely for long periods of time and works best when the food is already frozen.

•Be design, this chiller compartment is not a true freezer, and may not keep ice cream frozen, or freeze items.

•A colder setting may be used for these items, but other items in the refrigerator may also be affected.

•The chiller door is susceptible to breaking due to excessive ice build up. This part is not covered under your warranty. Be sure to defrost when the ice reaches 1/4 inch thick.

CARE AND MAINTENANCE

Defrosting Your Unit

•Defrost the unit when the frost accumulated on the evaporator is about 5mm (1/5 inch) thick. Set the thermostat dial to “0” position.

•Remove frozen or perishable foods from the appliance and place it in a cooler to protect the food.

•During the defrost cycle, the ice melts into the water collection tray.

•To remove the water, either remove the water collection tray and/or place a collection container under the tray.

•Dry the water collection tray and place back under the appliance compartment. Defrosting usually takes a few hours. After defrosting, return the thermostat dial to the desired position. To defrost quickly remove all foods from the unit and leave the door open. Never use a knife or other metal instrument to scrape ice/frost from the evaporator.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Manual DE Instrucciones This page left blank intentionally Table of Contents Refrigerator Safety Your safety and the safety of others are very importantImportant Safeguides Read this guide carefully Avanti Customer ServiceHelp US Help YOU Write down the model and serial numbersParts & Features  Before Using Your Unit Important Safety InstructionsInstallation Instructions  Installing Your Unit Extension Cord  Electrical Connection Reversing the Door Swing of Your Appliance Operating Your Unit Care and Maintenance Setting the Temperature Control  The Chiller Compartment Vacation Time  Cleaning Your Unit Power Failure  Moving Your UnitTroubleshooting Guide Problems with Your UnitService for Your Unit Avanti Products Customer ServicesWiring Diagram What is not Covered WarrantyFifth Year Warranty Avanti ProductsInstrucciones EN Español Economia DE Energia Cuidados EN LOS Periodos DE AusenciaSI Usted SE Muda This page Left Blank Intentionally Avanti Registration Card Did You Purchase An Additional Warranty Your Age Promote better products As Your Primary Residence, Do You
Related manuals
Manual 4 pages 6.45 Kb

RM4550W-2, RM4551B-2 specifications

The Avanti RM4550W-2 and RM4551B-2 are high-quality, compact refrigerator models designed to offer efficient cooling solutions for modern living spaces. These models are particularly well-suited for apartments, dorms, or as additional cooling units in larger homes, combining functionality with sleek aesthetics.

One of the defining features of the Avanti RM4550W-2 is its impressive 4.5 cubic foot capacity, providing ample space for food and beverages while fitting neatly into small areas. The RM4551B-2 offers a similar capacity but stands out with a bold black finish, catering to those who prefer a contemporary look. Both models feature adjustable shelves that allow users to customize their storage options, adapting to various sizes and shapes of items, from bottles to leftovers.

Energy efficiency is a hallmark of these Avanti models. They not only meet but exceed modern energy consumption standards, allowing users to enjoy cooler temperatures without inflating their energy bills. With technologies such as a manual defrost option, these refrigerators maintain optimal cooling without requiring frequent maintenance, making them user-friendly.

In terms of cooling technologies, both models employ a compressor cooling system that ensures rapid and consistent temperature control. This technology effectively minimizes temperature fluctuations, ensuring food and beverages are stored at ideal temperatures.

The design also includes convenient features such as a reversible door, which allows users to install the refrigerator in spaces with limited room for door swing. Furthermore, the integrated door bins provide easy access and additional storage options for condiments and smaller items, maximizing usability without taking up extra space.

Both Avanti refrigerator models also come equipped with an adjustable thermostat, giving users precise control over their cooling needs. This feature is essential for those who require specific temperature settings for various items, ensuring longevity and freshness.

Overall, the Avanti RM4550W-2 and RM4551B-2 refrigerators represent a harmonious blend of style, efficiency, and practicality. Their size and features make them ideal for individuals or families looking for a reliable cooling solution without compromising on space or design. Whether you're hosting guests, storing essentials for daily use, or simply need a stylish appliance for your home, these models deliver impressive performance and functionality that meet the demands of contemporary living.
Top Page Image Contents