Avanti WC34TM instruction manual Installation Instructions,  Before Using Your Wine Chiller

Page 5

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

Read all instructions before using the Wine Chiller.

DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

Before you throw away your old Wine Chiller: Take off the door. Leave the shelves in place so that children may not easily climb inside.

Never allow children to operate, play with, or crawl inside the appliance.

Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.

Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

Do not repair or replace any part of the refrigerator or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user- repair instructions. Replace the fuse with the same type.

-Save these instructions-

INSTALLATION INSTRUCTIONS

Before Using Your Wine Chiller

Remove the exterior and interior packing.

Check to be sure you have all of the following parts:

6 Shelves

Storage Retainer Bar

1 Instruction Manual

Clean the interior surface with lukewarm water using a soft cloth.

Installation of Your Wine Chiller

This Wine Chiller is designed for free standing installation only, and should not be recessed or built-in (Fully recessed).

Place your Wine Chiller on a surface that is strong enough to support it when it is fully loaded.

Allow 5 inches of space between the back and sides of the refrigerator, which allows the proper air circulation to cool the heat sink.

Locate the Wine Chiller away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

Avoid locating the unit in moist areas.

Plug the Wine Chiller into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

After plugging the Wine Chiller into a wall outlet, allow the unit to cool down for 2-3 hours before placing any items in the compartment.

5

Image 5
Contents Model Number / No. de Modelo Manual DE InstruccionesTable of Contents Avanti Customer Service If YOU Need ServiceHelp US Help YOU Read this guide carefullyParts & Features  Installation of Your Wine Chiller Installation Instructions Before Using Your Wine Chiller  Extension Cord  Electrical Connection Control Panel Lock Operating Your Wine ChillerCare and Maintenance Problem Possible Cause Troubleshooting Guide Moving Your Wine Chiller  Energy Saving TipsWiring Diagram Technical / Electrical Specifications Service for Your Wine ChillerWhat is not Covered What is Covered Limited ONE-YEAR WarrantyLimited Second Through Fifth Year Warranty Instrucciones DE Seguridad Atencion Panel DE Controles Control DE TemperaturaCuidado Y Mantenimiento AvisoRegistration Information

WC34TM specifications

The Avanti WC34TM is a versatile and compact wine cooler designed to cater to wine enthusiasts who value quality and convenience. With a sleek and modern design, this wine chiller seamlessly fits into any home décor while providing optimal storage conditions for up to 34 bottles of wine.

One of the most notable features of the Avanti WC34TM is its dual-zone temperature control. This allows users to set two distinct temperature ranges, enabling the storage of both red and white wines at their ideal temperatures. The upper zone maintains a temperature range of 54°F to 64°F, perfect for red wines, while the lower zone ranges from 46°F to 66°F, catering to white and sparkling wines. This dual-zone functionality ensures that each bottle is kept in optimal condition, enhancing the overall wine tasting experience.

The Avanti WC34TM is equipped with an efficient compressor cooling system. This technology ensures that the temperature remains consistent throughout the unit, preventing fluctuations that could affect the quality of the wine. Additionally, the compressor operates quietly, allowing the cooler to be placed in living areas without causing disturbances.

This wine cooler features a stylish glass door with a stainless steel frame. The UV-resistant glass helps protect the wine from harmful light exposure, which can degrade its quality over time. The door also includes a safety lock, providing peace of mind for those with valuable wine collections.

Inside, the Avanti WC34TM has adjustable wooden shelves, designed to accommodate various bottle sizes, including larger formats. The shelves slide smoothly, making it easy to access your favorite bottles while maintaining organization. The interior LED lighting illuminates the interior, creating an appealing display of your collection while remaining energy-efficient.

Furthermore, the integrated thermostat displays the current temperature, allowing users to monitor conditions easily. The cooler also features a ventilated design, promoting proper air circulation and ensuring that the bottles are stored in ideal conditions.

In summary, the Avanti WC34TM wine cooler offers a combination of functionality and elegance. With dual-zone temperature control, efficient compressor cooling, stylish design, and customizable storage options, it is an excellent choice for both novice and experienced wine collectors looking to preserve their collection's integrity and enhance their enjoyment of wine.