Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

•Read all instructions before using the Wine Chiller.

•DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

•Before you throw away your old Wine Chiller: Take off the door. Leave the shelves in place so that children may not easily climb inside.

•Never allow children to operate, play with, or crawl inside the appliance.

•Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.

•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

•Do not repair or replace any part of the refrigerator or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-

repair instructions. Replace the fuse with the same type. -Save these instructions-

Before Using Your Wine Chiller

•Remove the exterior and interior packing.

•Check to be sure you have all of the following parts:

Model SWC1600M-1	Model SWC2800M-1
(4) Shelves	(6) Shelves
(1) Instruction Manual	(1) Instruction Manual

•Clean the interior surface with lukewarm water using a soft cloth.

Installation of Your Wine Chiller

•This Wine Chiller is designed to be free standing installation only, and should not be recessed or built-in (Fully recessed).

•Place your Wine Chiller on a surface that is strong enough to support it when it is fully loaded.

•Allow 5 inches of space between the back and sides of the refrigerator, which allows the proper air circulation to cool the heat sink.

•Locate the Wine Chiller away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

•This Wine Chiller uses superconductor refrigeration technology (no compressor) and is not designed for storage in hot areas like garages, warehouses or outdoors since it is designed to operate at a maximum of 30 degrees below the ambient temperature.

•Avoid locating the unit in moist areas.

•Plug the Wine Chiller into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

•After plugging the Wine Chiller into a wall outlet, allow the unit to cool down for 2-3 hours before placing any items in the compartment.

SWC1600M1, SWC2800M-1 specifications

The Avanti SWC2800M-1 and SWC1600M-1 are innovative wine coolers designed to provide optimal storage conditions for wine enthusiasts. Both models are characterized by their sleek design, advanced cooling technologies, and user-friendly features, making them ideal for any wine lover looking to preserve the quality of their collection.

The SWC2800M-1 is known for its impressive capacity, accommodating up to 28 bottles of standard-sized wine. This makes it a perfect choice for serious collectors or those who frequently host gatherings. The unit is equipped with dual temperature zones, allowing users to store red and white wines at their respective ideal temperatures. The upper zone maintains temperatures between 40°F and 55°F, while the lower zone ranges from 50°F to 65°F, ensuring that each type of wine is kept in optimal conditions.

The SWC1600M-1, on the other hand, offers a slightly smaller capacity, storing up to 16 bottles. This model is perfect for casual wine drinkers or those with limited space. Like its larger counterpart, the SWC1600M-1 also features dual temperature zones, providing flexibility for storing different types of wines.

Both models utilize advanced thermoelectric cooling technology, which operates quietly and effectively while minimizing vibrations that can disturb wine sediments. The use of LED interior lighting not only enhances the aesthetic appeal of the cooler but also provides energy-efficient illumination, allowing users to showcase their wine collection.

In terms of design, the Avanti wine coolers are equipped with a tempered glass door that provides UV protection, preventing harmful rays from affecting the wine's quality. The adjustable wooden shelves offer a classic touch while allowing for customized storage configurations to accommodate various bottle shapes.

Additional features include a digital temperature display for easy monitoring and adjustment, as well as a lock feature for added security. The sleek black finish and stainless steel trim ensure these coolers fit seamlessly into any home décor.

In conclusion, the Avanti SWC2800M-1 and SWC1600M-1 are excellent options for anyone looking to preserve and showcase their wine collection. With their advanced technologies, thoughtful design, and user-friendly features, these wine coolers exemplify quality and functionality. Whether you have a large or small collection, Avanti offers a reliable solution for optimal wine storage.