Beko BK 7671 LD PLUS manual Temperature control and adjustment, Before operating

Page 9

GB

Instructions for use

 

 

Temperature control and adjustment

Operating temperatures are controlled by the thermostat knob (Fig. 2) and may be set between 1 and 5, the coldest position. When the appliance is switched on for the first time, the thermostat should be adjusted so that, after 24 hours, the average fridge temperature is no higher than +5°C (+41°F ).

We recommend setting the thermostat half-way between the 1 and 5 setting and monitoring to obtain the desired temperature i. e. towards 5 you will obtain a lower temperature and vice versa. Some sections of the fridge may be cooler or warmer ( such as the salad crisper and the top part of the cabinet ) which is quite normal.

In ambient temperatures above 25°C (77°F), especially in summer, turn the thermostat knob towards 5. In ambient temperatures below 25°C (77°F) turn the thermostat knob to a half way position.

Frequent door opening causes internal temperatures to rise, so it is advisable to close as soon as possible after use.

Before operating

Final Check

Before you start using the appliance check that:

1.The feet have been adjusted for perfect levelling.

2.The interior is dry and air can circulate freely at the rear.

3.The interior is clean as recommended under "Cleaning and care.”

4.The plug has been inserted into the wall socket and the electricity is switched on. When the door is open the interior light will come on.

And note that:

5.You will hear a noise as the compressor starts up. The liquid and gases sealed within the refrigeration system may also make some (noise), whether the compressor is running or not. This is quite normal.

6.We recommend setting the thermostat knob midway and monitor the temperature to ensure the appliance maintains desired storage temperatures (See section Temperature Control and Adjustment).

7.Do not load the appliance immediately it is switched on. Wait until the correct storage temperature has been reached. We recommend checking the temperature with an accurate thermometer (see; Temperature Control and Adjustment).

4

Image 9
Contents BK 7671 LD Plus GB Index Page Page Page Safety first Installation instructions Electrical requirementsTransportation instructions Suggested arrangement of food in the larder fridge Before operating Temperature control and adjustmentDefrosting Getting to know your applianceReplacing the interior light bulb Cleaning and careDo’s and don’ts Repositioning the doorTrouble shooting 548 876 1466 90o 40 -1mm 18 mm

BK 7671 LD PLUS specifications

The Beko BK 7671 LD PLUS is a noteworthy addition to the realm of modern refrigeration solutions, combining advanced technology with practical features that cater to the needs of contemporary households. With an emphasis on energy efficiency and user convenience, this refrigerator is designed to enhance the overall food storage experience.

One of the standout features of the Beko BK 7671 LD PLUS is its impressive Energy Efficiency Class, which typically places it in the A++ category. This designation translates into significant energy savings over time, making it an eco-friendly choice for consumers. The appliance utilizes advanced insulation materials and smart cooling technologies to maintain optimal temperatures with minimal energy consumption, contributing to both cost savings and environmental sustainability.

The BK 7671 LD PLUS showcases a spacious interior layout that maximizes storage potential without compromising accessibility. Its generous capacity allows for versatile organization of food items, making it ideal for families and individuals alike. The refrigerator compartment features adjustable shelves, enabling users to customize the space to accommodate larger items or to keep frequently used products within easy reach.

One innovative technology integrated into this model is the Active Dual Cooling System. This system enhances the appliance's performance by ensuring that the refrigerator and freezer sections are independently cooled. This not only maintains freshness but also prevents the transfer of odors between compartments, ensuring that food retains its original flavor and quality.

Another key characteristic of the Beko BK 7671 LD PLUS is its user-friendly control panel. The intuitive digital interface allows for precise temperature adjustments, enabling users to set their desired cooling levels with ease. Furthermore, the appliance is equipped with a quick freeze option, which is particularly useful for preserving the nutrients and textures of freshly purchased foods.

Additionally, the Beko BK 7671 LD PLUS features a No Frost technology, eliminating the need for manual defrosting. This automatic defrosting feature prevents the buildup of ice, ensuring that both the refrigerator and freezer maintain optimal performance without the hassle of regular maintenance.

Overall, the Beko BK 7671 LD PLUS embodies a harmonious blend of functionality, efficiency, and innovative technology. Ideal for modern living, it promises to cater to the diverse needs of consumers while ensuring that food stays fresh and well-preserved. With its combination of thoughtful design and advanced features, this refrigerator stands out as a reliable choice for any household.