Arrangement Examples See diagram | Beko TLDA 662 guide

IMPORTANT

INSTALLATION INSTRUCTIONS

1.The space in the room where the appliance is installed must not be smaller than 10 cubic metres.

2.If possible avoid placing the appliance near cookers, radiators or in direct sunlight as this will cause the compressor to run for long periods. If installed next to a source of heat or refrigerator, maintain the following minimum side clearances:

From Cookers	2"	(50 mm)
From Radiators	12" (300 mm)
From Refrigerators or Freezers	1"	(25 mm)

Allow a minimum of 60 mm (2.4 inches) between the top of the fridge and the ceiling or the underside of a wall cupboard.

3.Make sure that sufficient room is provided around the appliance to ensure free air circulation.

4. Fit the two plastic wall spacers supplied with the appliance rotating 1/4 turn to

the condenser at the back of the refrigerator (see diagram).

5. The appliance should be located on a

smooth surface. The two front feet can be adjusted as required. To ensure that

your appliance is standing upright adjust

the two front feet by turning clockwise or anti-clockwise, until the product is in firm contact with the floor. Correct adjustment of feet avoids excessive vibration and noise.

6.Refer to "Cleaning and Care" section to prepare your appliance for use.

7.This appliance has been designed to operate in ambient temperatures beetween +10 and +32 degrees C (50 and 90 degrees F).Therefore if the appliance is installed in an unheated / cold room (E.g.: Conservatory / annex / shed / garage etc.) then the food in the larder fridge [In particular salad, fruit, water and fruit juices] will start freezing because of the cold ambient temperature when the temperature drops below 0 C [Zero degrees Centigrade]. The appliance will resume normal operation when the ambient temperature rises back above +5 C. Please note, between 0 C and +5 C, the compressor will not run but the temperature in the larder fridge will be safe to store your food anyway. So don't worry when the compressor does not operate between 0 C and +5 C.

8.A special receptacle is supplied to store the mains plug during transit.

The receptacle is fixed at the back of the cabinet, on the right hand side of the compressor. (See diagram) Gently remove the plug from the receptacle. Never pull the mains cord, you may damage the appliance. In the case of transportation, ensure you locate the plug in the receptacle

provided to avoid transit damage.	5

GETTING TO KNOW YOUR LARDER FRIDGE

	1	12
	1	11
		11
	2
	3	13
	4	11
		11
	5
	4	11
	4
	4	11
	4
	4
	6	14
	6
	7
	8
	9
	10

Arrangement Examples (See diagram).

1.Front plastic trim

2.Interior light

3.Thermostat knob

4.Adjustable glass shelves

5.Wine rack

6.Chiller compartment flap

7.Chiller compartment drawer

8.Salad Crisper

9.Air grille

10.Adjustable front feet

11.Door shelves

12.Egg tray

13.Bottle rack

14.Water dispenser tank

TLDA 662 specifications

The Beko TLDA 662 is a modern, efficient solution for anyone looking to elevate their laundry experience. Designed with convenience and advanced features in mind, this washing machine is perfect for households of all sizes, delivering powerful performance and exceptional results.

One of the standout features of the Beko TLDA 662 is its ProSmart Inverter Motor. This technology not only enhances the machine's durability but also ensures quieter operation and reduced energy consumption. The inverter motor adapts its speed according to the load, optimizing energy use while maintaining effective washing performance. This makes the TLDA 662 a great choice for eco-conscious consumers aiming to lower their carbon footprint.

The machine boasts a generous capacity, accommodating up to 6 kg of laundry, making it ideal for average-sized families. Its range of 15 different washing programs allows users to select the perfect cycle for their clothing's specific needs. From delicate items to heavily soiled workwear, the TLDA 662 provides a tailored wash experience for various fabric types.

Efficiency is further enhanced by the machine's A+++ energy rating, ensuring that not only does it clean effectively, but it does so using minimal energy. This translates to lower utility bills and reduced environmental impact, aligning with modern sustainability goals.

Additionally, the Beko TLDA 662 incorporates innovative technologies such as AquaFusion, which minimizes water waste during washes. By ensuring that all the detergent is used to its maximum potential, this technology promotes a more efficient washing process. The machine also features a quick wash setting, allowing users to clean small loads in just 14 minutes, making it perfect for busy lifestyles.

With user-friendly controls and a clear digital display, operating the Beko TLDA 662 is intuitive. The delay start function adds to its convenience, allowing users to schedule washes to fit their routines. Safety features like child lock and overflow protection provide peace of mind for families.

Choosing the Beko TLDA 662 means investing in a reliable, efficient, and versatile washing machine designed to meet the demands of contemporary living, making laundry day less of a chore and more of a seamless part of daily life.