LG Electronics MFL62725501 When ALL Hookups are Complete, Converting to LP GAS

Page 13

INSTALLATION INSTRUCTIONS

WHEN ALL HOOKUPS ARE COMPLETE

Make sure all controls are left in the off position. Make sure the flow of combustion and ventilation air to the cooktop is unobstructed.

CONVERTING TO LP GAS

(OR CONVERTING BACK TO NATURAL GAS FROM LP)

This cooktop leaves the factory set for use with natural gas. When converting to LP gas, the conversion must be performed by a qualified LP gas installer.

The conversion instructions and LP orifices are supplied with your cooktop.

Keep these instructions and the orifices in case you want to convert back to natural gas.

13

Image 13
Contents Before YOU Begin GAS CooktopPreparing for Installation For Your SafetyCommonwealth of Massachusetts Tools YOU will NeedBefore YOU Begin Installation Safety InstructionsInstallation Safety Instructions Recommended GAS Supply Location from Backwall Dimensions and ClearancesBeneath Cabinet Installing the Cooktop UnitConnect the Cooktop to GAS Provide Adequate GAS SupplyGas Flow into Range Flexible Connector HookupElectrical Requirements Electrical ConnectionsGrounding Preferred MethodSeal the Openings Electrical ConnectionsCheck Ignition of Surface Burners Assemble the Surface BurnersElectric Ignition Quality of FlamesFor all surface burners except for the center burner Adjust the Surface Burner LOW Flame Simmer SettingConverting to LP GAS When ALL Hookups are CompleteMemo