MOUNTING INSTRUCTIONS
The orientation of the amplifier is critical to proper cooling. The cooling fins are designed to operate best when the amp is in a vertical position or mounted flat with the fins up. It is important to keep the chassis of the amplifier isolated from the metal of the vehicle because the heatsink is connected to signal ground for noise isolation. Grounding the heatsink will cause a ground loop. The plastic inserts in the mounting feet of the amp should remain in place as isolators. These inserts are designed to accept #8 screws for mounting.
#8 Mounting | VERTICAL | #8 Mounting |
Screws |
| Screws |
Isolation
Pads
HORIZONTAL
2