Connecting the Regulator to the CO2 Cylinder

Installation and Tapping ArctiCold Draft Dispenser

Connecting the Regulator to the CO2 Cylinder

■Remove blue plug from regulator fitting. (Note: Do not remove the carbonic washer).

■Screw regulator onto gas cylinder valve. Tighten with wrench until vertically straight. Be sure that shut-off valve (black lever) on regulator is in the OFF (horizontal) position.

■Place a screw clamp over end of red air line and push onto regulator tailpiece. Tighten clamp with a screwdriver.

CO2	VALVE
PRESSURE
GAUGE

20 30 40

PERLICK

10 50

Replacing CO2 Gas Cylinder

■Turn CO2 hand valve clockwise until seated and close shut-off valve on regulator.

■Unscrew regulator from cylinder fitting.

■Replace carbonic washer (Part No. 157F2P), if needed and reattach regulator to filled cylinder.

■Turn CO2 hand valve counterclockwise until fully open. Turn regulator shut-off valve to open position.

■Adjust CO2 gas flow as required, turning clock wise for higher pressure.

Proper CO2 Handling

PSI 60

CO2

GAS

DRUM

always...

■	Connect a regulator (reducing valve) to
	CO2 cylinder.
■	Secure cylinder in upright position whether in
	storage or in use.
■	Keep cylinder away from heat. Rupture disc
	vents at 122° F. maximum.

FITTING FOR

RED AIR HOSE

REGULATOR

ADJUSTING

SHUT-OFF VALVE SCREW (BLACK LEVER IN

CLOSED POSITION)

Adjusting the CO2 Gas Flow

■Turn regulator adjusting screw counterclock- wise until it turns freely.

■Turn hand valve counterclockwise on CO2 cylinder to the fully open position.

■Turn regulator adjusting screw clockwise until desired pressure is reached (approximately 12-15 lbs.). The desired pressure may vary based on location/elevation. Tighten stop nut on adjusting screw.

■Open shut-off valve on bottom of regulator.

CO2 Leak Test

Dilute a small amount of liquid dish washing soap and rub the soapy mixture around each connec- tion. If bubbles appear, tighten connection.

■	Ventilate room after high pressure gas leakage.
■	Check the last DOT test date on cylinder neck
	before filling. If more than five years old, the
	cylinder must be retested to DOT specifications.
■	Be sure CO2 cylinder outlet fitting is free of dust
	or dirt before attaching regulator.
■	Store CO2 cylinder and regulator assembly
	upright.
■	Allow only properly trained and experienced
	personnel to handle high pressure gas.

never...

■Connect cylinder directly to a keg without a regulator (reducing valve).

■Drop or throw regulator or CO2 cylinder.

■Transport CO2 cylinder in a closed vehicle.

■Apply oil to a regulator.

■Shut off CO2 cylinder when not in use. You will not save gas by doing so!

■Allow untrained, inexperienced personnel to handle high pressure gas.

Failure to heed this warning could result in personal injury or death.

Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.

5	Form No. Z2323
	Rev. 06.26.10

DC90ACLT specifications

The Perlick DC90ACLT is a cutting-edge undercounter refrigerator designed for both functional efficiency and aesthetic appeal, making it an ideal choice for home and commercial spaces. With a sleek stainless steel finish and a compact form factor, it not only optimizes space but also blends seamlessly with any décor.

One of the standout features of the DC90ACLT is its impressive cooling technology. Utilizing a powerful refrigeration system, this unit ensures that your beverages and perishables are maintained at optimal temperatures. The adjustable temperature range allows users to set their preferred levels, accommodating various types of products from wines to dairy items.

A key characteristic of the Perlick DC90ACLT is its advanced air circulation system, which promotes even cooling throughout the entire unit, minimizing temperature fluctuations. This guarantees that every item inside the refrigerator is preserved properly, enhancing shelf life and freshness.

This undercounter refrigerator is designed with energy efficiency in mind, featuring an ENERGY STAR rating. This designation indicates that the unit consumes less energy compared to standard models, reducing utility costs while also being more environmentally friendly. Users can enjoy the benefits of a high-performance cooling solution without worrying about excessive energy bills.

The DC90ACLT also emphasizes convenience. It comes with adjustable shelves that allow users to customize the interior layout according to their storage needs. The stylish glass door adds to its modern design while providing an enticing display of contents, encouraging easy access to items.

Additionally, the unit is equipped with a user-friendly digital temperature control interface, making it simple to set and monitor the temperature. LED lighting is integrated into the design, illuminating the interior space and enhancing visibility, especially in low-light areas.

Durability is another hallmark of the Perlick brand, and the DC90ACLT exemplifies this commitment. Constructed with high-quality materials, it promises longevity even in high-use environments. The unit's robust build ensures that it can withstand heavy loads, making it suitable for both residential and commercial applications.

In summary, the Perlick DC90ACLT is an exceptional undercounter refrigerator that combines innovative technology, energy efficiency, and user-friendly features, making it a valuable addition to any kitchen or bar area. Its versatility and stylish design make it not just a functional appliance, but a statement piece in modern spaces.

Installation and Tapping ArctiCold Draft Dispenser