Overall and Cutout Dimensions

Below are the required cutout dimensions and the overall dimensions of the cooktop as indicated in Fig. 4

		Overall

	Inches		Millimeters
W	33	7/8”	860
D	19	11/16”	500

	Cutout

	Inches	Millimeters
W	33 1/16”	840
D	18 7/8”	480

Fig. 4

Gas tubing and electrical location

Fig 5 shows the location of the gas supply and electrical outlet location. Fig 6 shows the placement of the supplied gas regulator. Refer to the chart for the required measurements.

Fig. 5

Fig. 6

	Inches	millimeters

A	1 9/16”	45
B	8 ¼”	210
C	8 ½”	215
D	1/8”	22

Installing the Cooktop

Please inspect all packing materials before discarding. After removing all packaged installation Parts from the box, make sure that the Cooktop is not damaged and is suitable for the particular Gas being used (Natural gas or liquid Propane). The unit is shipped ready to install to Natural gas. If the supplied gas is Liquid Propane (L.P.) Please refer to Page for gas conversion.

To prevent liquids from leaking accidentally into the underlying storage space, the appliance is equipped with a special gasket. Lay out the gasket and remove the protective coating and apply the gasket along the edge of the cabinet opening as indicated in Fig. 5.

Fig. 5