Kuppersbusch USA KD 6500.1 manual Active carbon filter, Lighting, Cleaning, Operation, Replacing

Page 10

Active carbon filter

•Operation

The activated charcoal filter is only fitted in recirculation type hoods. It will retain odours until it becomes saturated. It cannot be washed or regenerated, and must be replaced when the Filters LED starts, or at least once every 4 months of use. Attention:in recirculation type hoods the T2 Motor LED may start to flash as well as the Speed + T4 LED. This indicates that as well as replacing the activated charcoal filter, it is also necessary to perform maintenance operations on the metal grease filters.

•Replacing

Remove the grease filters (fig.10) and take out the activated charcoal filter from its housing, turning the lugs provided (fig. 11). Insert the new activated charcoal filter and replace the metal grease filters.

•Enabling the alarm signal

In recirculation type hoods the saturated filters alarm must be enabled as indicated below:

-Turn off the lights and the suction motor;

-Press and hold the T4 button for at least 10 seconds, until the LEDs start to flash. Note the number of flashes:

-2 flashes of the LED Activated charcoal filter saturation alarm ENABLED.

-1 flash of the LED Activated charcoal filter saturation alarm DISABLED;

•Resetting the alarm signal

To turn the alarm signal off, proceed as follows:

-Press the T4 button for at least 3 seconds, until the LEDs flash in confirmation. In any case the saturated filters alarm will only come into operation when the suction motor is turned on. WARNING: always comply with the maintenance and replacement times indicated, in order to avoid a possible risk of fire when the filters are saturated with grease.

Lighting

•Before attemping to replace the lamps, make sure that the light switch is turned off.

•It consists of 2 20 W-halogen spotlights (60 cm model) and 3 20 W-halogen spotlights (90 cm model).

•Replacement (fig.12)

Remove the two screws that lock the metal ring, take the spotlight out of its holder by

pulling slightly. When replacing, make sure that both pins are well inserted in the holder seat.

Cleaning

When cleaning the hood:

-Never use a wet cloth or sponge, or running water.

-Never use thinners or products containing alcohol, as they might damage the paintwork.

-Never use abrasive cleaning materials, in particular when cleaning stainless steel surfaces.

It is recommended to use a damp cloth and mild liquid household cleaner.

10

GB

Page 9 Page 11
Image 10
Page 9 Page 11
Contents GB Instructions Booklet Mode d’emploi Page Venting Requirements R N I N G Electrical RequirementsR N I N G Components InstallationInstallation instructions Fitting the wall brackets and SplashbackDrilling fixing holes item Fixing the canopyDucting or Recirculation fitting Splashback optionalFitting the telescopic chimney Recirculation fittingInstruction for Use MaintenanceOperation Metal grease filtersLighting CleaningActive carbon filter OperationLisez Bien Cette Fiche Avant D’INSTALLER LA Hotte Règlements D’ÉVACUATIONFiche Technique Électrique AV E R T I S S E M EN T Montage des étriers de support et sole Instructions pour l’installationComposants Positionnement des étriersRéalisation trous de fixation Montage du corps hotteConnexion aspirante ou filtrante Sole optionInstruction pour l’Utilisation Tableau des commandes figUtilisation Montage de la cheminée télescopiqueFiltres à graisses métalliques EntretienFiltre au charbon actif Eclairage NettoyagePage Page Page Page Page 436001889 02

KD 6500.1 specifications

The Kuppersbusch USA KD 6500.1 is a premium kitchen appliance that exemplifies superior German engineering and modern technology. As a built-in oven, it combines aesthetics, functionality, and high-performance cooking capabilities to meet the demands of contemporary culinary enthusiasts.

One of the standout features of the KD 6500.1 is its spacious interior, providing ample cooking space for large meals. With a capacity of 5.8 cubic feet, it allows users to bake, roast, and broil multiple dishes simultaneously. This makes it ideal for preparing festive meals or family gatherings. In terms of design, the oven boasts a sleek, minimalist aesthetic with a stainless steel finish that complements any kitchen décor. The integrated handle and seamless glass door enhance its modern appeal, while the soft-close mechanism ensures smooth operation.

The KD 6500.1 is equipped with advanced cooking technologies, including convection cooking and a multi-sensor temperature control system. The convection feature promotes even heat distribution, resulting in perfectly cooked dishes, while reducing cooking times. The multi-sensor system monitors the internal temperature of the food, ensuring precision and preventing overcooking.

Another significant highlight of the KD 6500.1 is its intuitive touch control panel. The user-friendly interface allows for easy navigation through various cooking modes and settings, including traditional baking, grilling, and self-cleaning. Additionally, the oven offers a variety of preset programs, making it exceptionally easy for users to achieve consistent results regardless of their cooking experience.

Energy efficiency is a key aspect of the Kuppersbusch KD 6500.1. It is designed to minimize energy consumption without compromising performance, thereby contributing to a more sustainable kitchen environment. The oven also features a high-quality insulation system that keeps external surfaces cool to the touch, enhancing safety during use.

In summary, the Kuppersbusch USA KD 6500.1 is an innovative built-in oven that brings together style, functionality, and cutting-edge technology. With its generous capacity, advanced cooking features, and intuitive controls, it is a fantastic addition to any modern kitchen, catering to both everyday meals and gourmet cooking experiences. Whether you're a novice home cook or a seasoned chef, the KD 6500.1 promises reliable performance and exceptional results.
Top Page Image Contents