6 Center oven mto cabmet
. CUtOJt Secure oven to cabmet usmq four screws through mountmg holes III the front frame of the oven Do Not over?lghten screws
7 Replace the oven racks. n Replace the oven door by
partMy flttmg the door hinges mto the hmge slots. Pull door shghtly towards you, then shde door completely m place. Open door fully and swing the ‘2door chps away from the hinge slots Turn power supply on
8 Turn on power supply Check
. the operation of the oven elements Setthe oven selector control knob to ‘BAKE’ Set the oven temperature control knob to 350°F The bottom element should glow red and the mdxator hght should be on The upper element should become hot. but not glow red The oven mdxator hght goes off when the oven 1s preheated
9 Check the operation of the n broil element Set the oven
selector and oven temperatue control knobs to ‘BROIL’. The top element should glow red and the mdicator hght should be on
Roper oven. Keep Installation
5. 6
Numbers correspond to steps
PANEL C