Lennox Hearth W10167098A Connect Water Supply, Water Pressure, Reverse Osmosis Water Supply

Page 4

Water Pressure

A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and

827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. See “Water Filtration System.”

If you have questions about your water pressure, call a licensed, qualified plumber.

Connect Water Supply

Read all directions before you begin.

IMPORTANT: If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

Connect to Water Line

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Locate a ¹⁄₂" (12.70 mm) to 1¹⁄₄" (3.18 cm) vertical cold water pipe near the refrigerator.

IMPORTANT:

Make sure it is a cold water pipe.

Horizontal pipe will work, but drill on the top side of the pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.

4.Determine the length of copper tubing you need. Measure from the connection on the lower rear corner of refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a cordless drill, drill a ¹⁄₄" (6.35 mm) hole in the cold water pipe you have selected.

 

A

G

B

 

 

C

F E

D

A. Cold water pipe

E. Compression sleeve

B. Pipe clamp

F. Shutoff valve

C. Copper tubing

G. Packing nut

D. Compression nut

 

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" (6.35 mm) drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so the washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.

7.Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw the compression nut onto outlet end with adjustable wrench. Do not overtighten.

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

Connect to Refrigerator

Style 1

1.Unplug refrigerator or disconnect power.

2.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

A

B

C

D

A. Tube clamp

C. Compression nut

B. Copper tubing

D. Valve inlet

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

4

Image 4
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsBefore You Throw Away Your Old Refrigerator or Freezer Location Requirements Electrical RequirementsWater Supply Requirements Recommended Grounding MethodConnect Water Supply Water PressureReverse Osmosis Water Supply Connect to Water LineComplete the Installation Using the ControlsRefrigerator USE Convertible Drawer Temperature Control Crisper Humidity ControlChilled Door Bin Water and Ice DispensersIce Maker and Storage Bin Cleaning Refrigerator CareWater Filtration System Changing the Light BulbsTroubleshooting Refrigerator OperationTemperature and Moisture Ice and WaterAccessories Water Filter CertificationsWater dispenser will not operate properly Water is leaking from the dispenserPerformance Data Sheets Base Grille Water Filtration SystemBase Grille Water Filtration System Kitchenaid Refrigerator Warranty ONE Year Limited WarrantyLifetime Limited Warranty on Door Bins and can Racks Items Kitchenaid will not PAY forInstructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurInstructions Dinstallation Exigences demplacementDéballage du réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications de l’alimentation en eau Spécifications électriquesRaccordement de la canalisation deau Raccordement au réfrigérateur Style Commande de température dans le tiroir Convertible Utilisation des commandesUtilisation DU Réfrigérateur Compartiment fraîcheur dans la porte Réglage de lhumidité dans le bac à légumesDistributeurs d’eau et de glaçons Machine à glaçons et bac dentreposage Remplacement du filtre à eau Entretien DU RéfrigérateurSystème de filtration de leau NettoyageDépannage Remplacement des ampoules d’éclairageFonctionnement du réfrigérateur Température et humidité Glaçons et eauAccessoires Le distributeur de glaçons ne fonctionne pas correctementLe distributeur deau ne fonctionne pas correctement De leau suinte du distributeurFeuilles DE Données SUR LA Performance Système de filtration deau de la grille de la baseSystème de filtration deau de la grille de la base Garantie Limitée DE UN AN Garantie DU Réfrigérateur KitchenaidKitchenaid NE Prendra PAS EN Charge

W10167098A specifications

The Lennox Hearth W10167098A is a high-performance gas fireplace that blends style, efficiency, and advanced technology to enhance your home’s comfort and aesthetics. This model is designed to provide warmth and character to any room while ensuring energy efficiency and ease of use.

One of the standout features of the W10167098A is its adjustable flame settings, allowing users to customize the heat output and ambiance according to their preferences. This flexibility is complemented by its realistic log set, designed to mimic the look of real wood, enhancing the overall aesthetic of the fireplace. The inclusion of multi-colored LED lighting further elevates the visual appeal, creating a stunning focal point for any living space.

Efficiency is at the forefront of the W10167098A’s design. Equipped with high-efficiency gas burners, this fireplace offers a significant reduction in gas consumption compared to traditional models. It boasts an impressive Annual Fuel Utilization Efficiency (AFUE) rating, ensuring that users benefit from optimal heat output while minimizing energy costs. This makes it an environmentally friendly option for homeowners looking to reduce their carbon footprint without sacrificing comfort.

The W10167098A also integrates several advanced technologies aimed at enhancing user experience. The remote control system offers convenient operation from across the room, allowing users to adjust flame height and heat settings effortlessly. Additionally, the fireplace can be hooked up to smart home systems, providing users with the ability to control their fireplace through mobile apps or voice commands, further streamlining the experience.

Safety is another critical component of the W10167098A’s design. With built-in safety features such as an automatic shut-off mechanism, users can enjoy peace of mind knowing that the fireplace will operate safely. The tempered glass front adds an extra layer of security while enhancing the unit's modern aesthetic appeal.

Overall, the Lennox Hearth W10167098A is a thoughtfully designed gas fireplace that combines style, efficiency, and modern technology. Whether users are looking to create a cozy atmosphere for gatherings or a tranquil retreat for relaxation, this fireplace meets those needs while providing a reliable and efficient heating solution. With its sleek design and advanced features, the W10167098A is an excellent addition to any home.