Liebherr RO500 manual Additional Functions Figures, Audible Warning Signal Figure

Page 11
Figure 13

OPERATION

Additional Functions - Figures 9-12

In the setup mode you can set the childproof lock, adjust the brightness of the display and choose the unit of temperature for the display in degrees Fahrenheit or degrees Celsius. The childproof lock is designed to protect the appliance from being switched off accidentally by children.

Activating set-up mode:

•Press the Ventilation button for approximately five seconds

-the Ventilation button flashes - the display shows C for childproof lock.

Note: The value to be altered flashes.

Figure 9

•Select the required function by pressing the Up / Down buttons:

C = childproof lock, = brightness

or = changing the temperature display.

•Now select ON or OFF by pressing the Ventilation button briefly.

For C = childproof lock, press the Up / Down but- tons to select:

C 1 = childproof lock on or

C 0 = childproof lock off and acknowledge with the Ventilation button.

When the symbol is lit, the childproof lock is activated.

Figure 10

For = brightness, press Up / Down buttons to select:

1 = minimum to

5 = maximum brightness and acknowledge with Ventilation button.

Figure 11

For = unit of temperature, press Up / Down buttons to select °C = to display degrees Celsius, °F = to display degrees Fahrenheit for tempera- ture display and acknowledge with Ventilation button.

Figure 12

Exit the set-up mode:

•Exit the setup mode by pressing the On/Off but- tons; after two minutes the electronic system switches over automatically. The normal operating mode is activated again.

Audible Warning Signal - Figure 13

The audible warning signal helps you to protect the food in your refrigerator and save energy.

- The audible warning signal sounds when the door is open for longer than about 180 seconds. The audi- ble warning device is turned off by pressing the Alarm button.

- The audible warning signal sounds when the interior gets too warm or

too cold. The temperature display will also flash. The audible warning

device is turned off by pressing the Alarm but- ton. The temperature display will continue to flash until the cause of the alarm has been rectified.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Outdoor Cooler Use and Care ManualAdditional benefits Table of Contents Disposal of Old Appliance SafetyElectrical Safety Important Safety InformationDisposal of Carton Safety Instructions and WarningsUnpacking SN-T Safety RegulationsDescription of Appliance and Equipment Figure InstallationDimensions Figure Installation FigureReversing the Door Hinges Figure Turning the Appliance On and Off Figure Setting the Temperature FigureOperation Operating Control Elements FigureAdditional Functions Figures Audible Warning Signal FigureAir Exchange with Activated Charcoal Filter Figure Refrigerator CompartmentInterior Light Shelf Arrangement FigureDefrosting DEFROSTING/CLEANINGCleaning Appliance Information TroubleshootingCustomer Service Liebherr Warranty Plan Warranty

RO500 specifications

The Liebherr RO500 is a robust and multifaceted wheeled excavator that stands out in the construction and earthmoving sectors. It combines advanced technology with practical design to deliver exceptional performance and productivity. Built with a focus on versatility, the RO500 can handle a wide range of applications from digging and loading to demolition and material handling, making it a favorite among contractors and operators.

One of the main features of the Liebherr RO500 is its powerful engine. It is equipped with high-performance diesel engines, capable of producing substantial horsepower while maintaining fuel efficiency. This balance not only enhances the excavator's performance but also reduces operational costs — a critical factor in today’s competitive market.

The hydraulic system of the RO500 is another highlight, featuring Liebherr's advanced, energy-efficient hydraulic technology. This system ensures precise control and responsiveness, allowing operators to execute tasks with remarkable accuracy and speed. The hydraulic components are designed to provide high efficiency and reliability, which translates to increased productivity on job sites.

The RO500 also boasts a smart operator cabin designed for comfort and usability. The spacious cabin is equipped with modern controls and an intuitive interface, ensuring that operators can work efficiently without fatigue. Visibility is enhanced with large windows and strategically positioned mirrors, allowing operators to have a clear view of the work area for improved safety.

In terms of safety, the Liebherr RO500 is designed with several features to protect operators and bystanders alike. The reinforced structure, anti-slip surfaces, and intelligent monitoring systems ensure that the excavator operates securely in various conditions. Additionally, the machine is equipped with efficient services that enable quick and easy maintenance, minimizing downtime and maximizing productivity.

Another noteworthy characteristic of the RO500 is its customizable attachments. Liebherr offers a range of buckets, grapples, and other tools that can be easily interchangeably mounted. This flexibility allows operators to adapt the excavator quickly to different tasks, enhancing its overall utility on the job site.

With its combination of power, efficiency, and user-centric design, the Liebherr RO500 epitomizes what modern excavators should be. It delivers reliable performance while offering flexibility to handle multiple tasks, making it an invaluable asset to construction and heavy equipment fleets around the world. With features that prioritize both operator comfort and worksite safety, the RO500 is an excellent choice for businesses aiming to maximize productivity and safety in their operations.
Top Page Image Contents