Liebherr RO 500 Operation, Operating Control Elements Figure, Setting the Temperature Figure

Page 10

Operation

Operating and

Control Elements - Figure 5

Figure 5

1Temperature display

2Temperature setting buttons

3Alarm On/Off button

4Fan switch

5Childproof lock

6On/Off button

Turning the Appliance

On and Off - Figure 6

Clean the appliance before turning it on for the first time. See Cleaning.

Connect the appliance to the dedicated outlet.

•To turn the appliance on: Press the On/Off but- ton until the display lights up.

•To turn the appliance off: Keep the On/Off button pressed for three seconds so that the tem- perature display goes out.

Figure 6

Setting the Temperature - Figure 7

To reduce the temperature: Press the Down but-

ton.

To increase the temperature: Press the Up button.

-While you are entering the temperature, the set temperature will flash on the display.

-You can change the settings in increments of 1°F (1°C) by briefly pressing the button again. The electronic controls will switch over automati- cally about five seconds after the last time you pressed the button. The actual temperature will display.

Figure 7

If F0, F1 or F7 appears in the display, the appliance has a fault. Contact your nearest customer service representative.

Ventilation button - Figure 8

The ventilation button can be used to increase the relative humidity in the interior.

•To switch on: Press the Ventilation button. The indicator lamp in the button will light. The fan is permanently in operation = higher humidity.

•To switch off: Press the button again so that the fan symbol goes dark. The fan runs in parallel to

the compressor = lower humidity.

Note:

-The energy consumption will increase when the fan is switched on.

-To save energy, the fan will switch off automati- cally when the door is open.

Figure 8

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Use and Care Manual Outdoor CoolerAdditional benefits Table of Contents Safety Disposal of Old ApplianceImportant Safety Information Electrical SafetyUnpacking Safety InstructionsDisposal of Carton Safety Regulations SN-TInstallation Description of Appliance and Equipment FigureReversing the Door Hinges Figure Operating Control Elements Figure Setting the Temperature FigureOperation Turning the Appliance On and Off FigureAudible Warning Signal Figure Additional Functions FiguresShelf Arrangement Figure Refrigerator CompartmentInterior Light Air Exchange with Activated Charcoal Filter FigureCleaning Defrosting/CleaningDefrosting Customer Service TroubleshootingAppliance Information Warranty LIEBHERR WARRANTY PLAN

7081 457-00, RO 500 specifications

The Liebherr RO 500,7081 457-00 is a robust and innovative material handling machine that combines advanced technology with high performance. Designed for a variety of applications in the construction and industrial sectors, this model stands out due to its versatility, reliability, and superior efficiency.

One of the main features of the Liebherr RO 500 is its powerful engine, which provides a remarkable output, ensuring that it can handle heavy loads with ease. The machine is equipped with a high-performance hydraulic system that enhances its lifting and maneuvering capabilities, making it suitable for tasks requiring significant strength and precision. With a maximum lifting capacity that exceeds industry standards, it can tackle various types of materials, ranging from concrete blocks to steel beams.

In terms of technology, the RO 500 leverages Liebherr's state-of-the-art control systems, allowing for smooth operations and improved user experience. The intuitive interface provides operators with real-time data on machine performance, enabling them to make informed decisions quickly. The incorporation of advanced sensors ensures enhanced safety and stability during operation, minimizing the risk of accidents or equipment damage.

The design of the Liebherr RO 500 also focuses on operator comfort and efficiency. The spacious cab features an ergonomic layout with adjustable seating and easy-to-reach controls, reducing operator fatigue during long work hours. The large windows not only provide excellent visibility but also enhance overall situational awareness, allowing operators to work confidently in busy environments.

Durability is another key characteristic of the RO 500. Built with high-quality materials and robust construction methods, this model can withstand the rigors of daily use in tough conditions. Its maintenance-friendly design ensures that routine checks and repairs can be carried out with minimal downtime, contributing to greater overall productivity.

In conclusion, the Liebherr RO 500,7081 457-00 represents a perfect blend of power, technology, and operator-centric design. With its formidable capabilities, advanced features, and commitment to safety and efficiency, it is a valuable asset for any material handling operation, making it highly regarded in the construction and industrial machinery market.
Top Page Image Contents