Liebherr WS 40 Operation, Operating Control Elements Figure, Setting the Temperature Figure

Page 10

OPERATION

Operating and

Control Elements - Figure 5

Figure 5

1.Lower compartment temperature display

2.Upper compartment temperature display

3.Lower compartment temperature setting buttons

4.Upper compartment temperature setting buttons

5.Alarm ON/OFF button

6.Interior light ON/OFF button

7.Childproof Lock

8.ON/OFF button

9.Ventilation button

Turning the Appliance

ON and OFF - Figure 6

Clean the appliance before turning it on for the first time. See Cleaning. Connect the appliance to the dedicated outlet - the appliance is turned on.

The alarm will sound when the appliance is turned on for the first time and when the appliance is warm. Press the Alarm button to turn it off. The temperature display will also flash.

•To turn the appliance off: Keep the ON / OFF button pressed for three seconds so that the temperature display goes out.

•To turn the appliance on: Press the ON / OFF button until the display lights up.

Figure 6

Setting the Temperature - Figure 7

The temperature of both compartments can be set separately.

To reduce the temperature: Press the “DOWN“ button;

-on the left for the upper compartment, on the right for the lower compartment.

To increase the temperature: Press the “UP“ button.

-While you are entering the temperature, the set temperature will flash on the display.

-You can change the settings in increments of 1°F (1°C) by briefly pressing the button again. The electronic controls will switch over automati- cally about five seconds after the last time you pressed the button. The actual temperature dis- plays.

Figure 7

If F0 or F1 appears in the display, the appliance has a fault. Contact your nearest customer service rep- resentative, indicate the type of appliance, index and Appliance / serial number.

Ventilation Button - Figure 8

Should you wish to use the wine cooler to store wine for long periods of time, activate the “Ventilation“ button. The light in the button comes on and the ventilation function is active. Then the climate which corresponds to that of a wine cellar is achieved inside the wine cooler. Bottle corks are prevented from drying out due to an increased level of humidity.

Figure 8

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents De l’armoire à vin réfrigérante For Wine CoolerDel frigorífico para vinos Thank you for your trust Table of Contents Important Safety Information SafetyDisposal of Old Appliance Electrical Safety Unpacking Safety Instructions and WarningsDisposal of Carton Safety Regulations Wine Cooler FigureDimensions Figure InstallationInstallation Figure Reversing the Door Hinges Figure Operating Control Elements Figure Setting the Temperature FigureOperation Turning the Appliance On and OFF FigureAudible Warning Signal Figure Additional Functions Figures 9Interior Lighting Figures 14 Additional Features Pull-out Racks FigureWine Cooler Compartment LabelsStorage Diagram Figure Air Exchange with Activated Charcoal Filter FigureCleaning DEFROSTING/CLEANINGDefrosting Cleaning the Motor Compartment Figure Troubleshooting Customer Service Appliance InformationWarranty Liebherr Warranty Plan

WS 40 specifications

The Liebherr WS 40 is a highly advanced wheel loader known for its exceptional performance, versatility, and efficiency in various applications. Designed to cater to the needs of construction, mining, and agricultural sectors, the WS 40 stands out for its robust build and innovative technology.

One of the main features of the Liebherr WS 40 is its powerful engine, which complies with the latest emissions regulations while providing impressive output. The loader is equipped with a modern, fuel-efficient diesel engine that delivers ample power for demanding tasks while ensuring reduced fuel consumption. This balance of power and efficiency is crucial in optimizing operational costs and minimizing the environmental impact.

The hydraulic system of the WS 40 is another highlight, featuring advanced sensors and controls that enhance responsiveness and precision. Liebherr's renowned hydraulic expertise allows for smooth and efficient operations, whether it's lifting heavy loads or executing fine adjustments. The system is designed for durability, ensuring long service life and reliability even in harsh working conditions.

This wheel loader also boasts exceptional agility, with a compact design that allows it to maneuver easily in tight spaces. The articulated steering system, combined with a short wheelbase, provides excellent turning capabilities, making the WS 40 ideal for urban and confined work sites. Operators can expect high levels of comfort and control, thanks to ergonomically designed controls and a spacious cabin with excellent visibility.

Another key characteristic of the Liebherr WS 40 is its versatility. The loader can be outfitted with a wide range of attachments, enabling it to perform various tasks, from material handling to grading and snow removal. This adaptability enhances its utility across different industries, allowing operators to maximize productivity and efficiency.

In terms of safety, the WS 40 is equipped with numerous features that protect both the operator and the machine. The robust safety framework includes roll-over protection structures, improved visibility, and advanced braking systems. These features ensure that the loader can operate safely in challenging environments.

In summary, the Liebherr WS 40 is a standout wheel loader that combines power, versatility, and advanced technology. With its efficient engine, responsive hydraulic system, and a host of safety features, it is well-suited for a wide range of applications, making it a favored choice among professionals in various fields. Whether tackling heavy lifting tasks or navigating tight spaces, the WS 40 delivers performance and reliability that operators can trust.
Top Page Image Contents