Liebherr CS 1400 7082 663-00 manual Temperature Display Figure, Ventilation Figure

Page 9

Operation

Temperature Display - Figure 4

In normal operation, the following settings will be displayed:

•the average refrigerator temperature

•the warmest frozen food temperature.

When starting up for the first time or when the appliance is warm, dashes will appear in the freezer temperature display, until the temperature in the freezer compartment is 32°F (0°C).

The display will flash:

•if you change the temperature or

•if the temperature rises by several degrees, indi- cating cold loss, e.g. if you place fresh, “warm” food in the freezer or if you remove or repack frozen food, the temperature may rise for a short time due to warm air flowing into the freezer.

•If “F1” to “F5” appears in the display, the appli- ance has a fault. Have the fault number available when you contact the customer service depart- ment.

Ventilation - Figure 4

The ventilation switch is used for re-circulated cool air:

You can use the switch as required to:

•chill large quantities of fresh food fast.

•keep the temperature evenly distributed through- out the entire refrigerator compartment. The air will circulate more intensively, keeping all the different areas in the compartment at the same temperature and ensuring all the food inside is chilled at the same temperature.

We recommended you use the ventilation fan if:

•room temperatures are too high (approximately 95°F [35°C] or higher).

•the air humidity is high, during high heat and humidity.

Turning on: Touch the Ventilation icon briefly so the LED turns on.

Turning off: Touch the Ventilation icon again until the LED  turns off.

Audible Alarm Signal - Figure 4

The audible alarm signal helps to protect frozen food and to save energy.

The audible alarm signal is switched off by touching the alarm icon.

Audible door alarm

This sounds when the door has been left open for longer than about 180 seconds. The sound switch- off function is active as long as the door is left open. The alarm automatically switches back to standby when the door is shut.

Audible/visual temperature alarm

It always sounds if the freezer temperature is not low enough. The temperature display and the alarm LED flashes at the same time.

This can be caused by:

-warm, fresh food being placed in the freezer;

-too much warm air from the outside entering when re-arranging or removing frozen food,

-a fault in the appliance.

The temperature display will continue to flash until the cause of the alarm has been rectified. It will then stop flashing and light up continually. The audible warning signal is now automatically reset.

Power Failure/Frost-Control

Display - Figure 4

If the power failure LED is lit, this means the freezer temperature has risen too high during the last few hours or days due to a power failure. The freezer temperature display flashes at the same time.

•If you touch the Alarm icon now, the highest temperature registered during the power failure will be displayed.

•Check the quality of the food in case it has become too warm or even defrosted.

•The highest temperature will appear for approximately one minute. After that, the actual temperature in the freezer will reappear.

The display can be turned off by touching the Alarm icon again.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Use and Care Manual Table of Contents Electrical Safety SafetyPlease read and follow these instructions Disposal of Old ApplianceImportant Safety Information Disposal of Carton Safety RegulationsDescription of Appliance and Equipment Figure FeaturesDescription of refrigerator Description of freezerOperating and Control Elements , Figure Temperature and control displayAppliance Freezer Operating iconsTo reduce the temperature Setting the Temperature FigureTo increase the temperature OperationAudible Alarm Signal Figure Temperature Display FigurePower Failure/Frost-Control Ventilation FigureHow to activate the setup mode Setup Mode FigureExit setup mode Supercool FigureHow to activate the Sabbath Mode = Sabbath ModeHow to deactivate the Sabbath Mode = Display brightness How to adjust the display brightnessHow to deactivate the child lock How to activate the child lock= Child lock Touch the freezer compartment Down iconArranging Food Figure Equipment Refrigerator CompartmentRepositioning the door racks Figure Vario Box FigureRemoving the shelves Figure Repositioning the shelves FigureIf you need space for large bottles and con- tainers Front half of the secInterior Light Bulb dataReplacing the bulb Freezing Freezer CompartmentInformation System Figure Freezing with Superfrost FigureFreezing and Storage Cleaning CleaningDefrosting/Vacation DefrostingVacation Tips Problem Possible Cause and Remedy TroubleshootingCustomer Service Figure Service Number 2 and Appliance / Serial NumberAppliance Information LIEBHERR WARRANTY PLAN Warranty

CS 1400 7082 663-00 specifications

The Liebherr CS 1400 7082 663-00 is a cutting-edge mobile crane that boasts impressive specifications and advanced technologies, making it a popular choice among construction and infrastructure professionals. This model is designed to provide high performance, versatility, and efficiency on job sites of all sizes.

One of the key features of the CS 1400 is its impressive lifting capacity. With a maximum lifting capacity of 14 tons, this crane is capable of handling heavy loads with ease. The crane's reach is also commendable, with a maximum radius that allows it to perform lifts over long distances, enhancing its usability in various applications. The compact dimensions of the CS 1400 enable it to navigate constricted spaces, making it ideal for urban construction projects.

The Liebherr CS 1400 comes equipped with advanced hydraulic and electronic systems that enhance its operational efficiency. The crane incorporates a sophisticated hydraulic system designed for optimal power and responsiveness during lifting operations. This allows operators to perform precise maneuvers, reducing the risk of accidents and increasing overall safety on the worksite.

In addition, the CS 1400 is fitted with modern control technologies that provide operators with an intuitive interface. The operator cabin is ergonomically designed, offering clear visibility and comfort during operation. Furthermore, sophisticated load management systems are integrated to ensure that the crane operates within its optimal limits, reducing wear and tear on components while improving safety.

Another notable characteristic of the Liebherr CS 1400 is its modular design, allowing for easy assembly and disassembly. This feature facilitates quick setup and teardown times, making it highly effective for rental companies and contractors who require flexibility in their operations. The lightweight materials used in its construction not only contribute to its strength but also make it easier to transport.

Overall, the Liebherr CS 1400 7082 663-00 embodies reliability, innovation, and efficiency in mobile crane technology. Its robust performance, versatility, and user-friendly design make it an essential asset for any construction project, ensuring productivity and safety while meeting the demands of modern engineering challenges. With Liebherr's commitment to quality and engineering excellence, the CS 1400 continues to set benchmarks in the crane industry.
Top Page Image Contents