Liebherr WU 40 manual Operation, Operating Control Elements Figure, Setting the Temperature Figure

Page 10

OPERATION

Operating and

Control Elements - Figure 5

Figure 5

1.Lower compartment temperature display

2.Upper compartment temperature display

3.Lower compartment temperature setting buttons

4.Upper compartment temperature setting buttons

5.Alarm ON/OFF button

6.Interior light ON/OFF button

7.Childproof Lock

8.ON/OFF button

9.Ventilation button

Turning the Appliance

ON and OFF - Figure 6

Clean the appliance before turning it on for the first time. See Cleaning. Connect the appliance to the dedicated outlet - the appliance is turned on.

The alarm will sound when the appliance is turned on for the first time and when the appliance is warm. Press the Alarm button to turn it off. The temperature display will also flash.

•To turn the appliance off: Keep the ON / OFF button pressed for three seconds so that the temperature display goes out.

•To turn the appliance on: Press the ON / OFF button until the display lights up.

Figure 6

Setting the Temperature - Figure 7

The temperature of both compartments can be set separately.

To reduce the temperature: Press the “DOWN“ button;

-on the left for the upper compartment, on the right for the lower compartment.

To increase the temperature: Press the “UP“ button.

-While you are entering the temperature, the set temperature will flash on the display.

-You can change the settings in increments of 1°F (1°C) by briefly pressing the button again. The electronic controls will switch over automati- cally about five seconds after the last time you pressed the button. The actual temperature dis- plays.

Figure 7

If F0 or F1 appears in the display, the appliance has a fault. Contact your nearest customer service rep- resentative, indicate the type of appliance, index and Appliance / serial number.

Ventilation Button - Figure 8

Should you wish to use the wine cooler to store wine for long periods of time, activate the “Ventilation“ button. The light in the button comes on and the ventilation function is active. Then the climate which corresponds to that of a wine cellar is achieved inside the wine cooler. Bottle corks are prevented from drying out due to an increased level of humidity.

Figure 8

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Use and Care Manual For Wine CoolerThank you for your trust Table of Contents Important Safety Information SafetyDisposal of Old Appliance Electrical Safety Unpacking Safety Instructions and WarningsDisposal of Carton Safety Regulations Under-Counter Wine CoolerFitting Dimensions Figure InstallationInstallation and Fitting Figure Installation Operating Control Elements Figure Setting the Temperature FigureOperation Turning the Appliance On and OFF FigureAudible Warning Signal Figure Additional Functions Figures 9Interior Lighting Figures 14 Additional Features Pull-out Racks FigureWine Cooler Compartment LabelsStorage Diagram Figure Air Exchange with Activated Charcoal Filter FigureCleaning DEFROSTING/CLEANINGDefrosting Troubleshooting Customer Service Appliance InformationWarranty Liebherr Warranty Plan

WU 40 specifications

The Liebherr WU 40 is a highly efficient and versatile wheel loader designed for a variety of tasks in construction, agriculture, and material handling. Known for its reliability and performance, the WU 40 combines robust engineering with advanced technologies to meet the demanding needs of modern operations.

At the heart of the Liebherr WU 40 is its powerful engine, which delivers optimal performance while maintaining fuel efficiency. The machine is equipped with a reliable Liebherr engine that not only ensures high torque but also adheres to stringent emissions regulations, contributing to a reduced environmental impact.

One of the standout features of the WU 40 is its impressive lifting capacity and maximum dump height, which allows for efficient loading and transport of materials. With its articulated design, the loader provides excellent maneuverability even in confined spaces, making it an ideal choice for urban construction projects or agricultural applications.

The WU 40 is equipped with the latest hydraulic technologies, which facilitate rapid and precise movements. Its hydraulic system allows for smooth lifting and lowering actions, ensuring that operators can work quickly and efficiently while minimizing wear and tear on the machinery. The adjustable boom enables users to handle various attachments, offering greater versatility for tasks such as digging, lifting, and landscaping.

Operator comfort is another key consideration in the design of the Liebherr WU 40. The cabin is spacious and ergonomically designed, featuring intuitive controls which enhance operator confidence and productivity. With excellent all-around visibility, operators can easily navigate their surroundings, ensuring safety during operation.

Liebherr's emphasis on durability is evident in the construction of the WU 40, which utilizes high-quality materials and components that withstand the rigors of various working environments. This commitment to durability reduces maintenance needs and extends the lifespan of the equipment.

Advanced technological features such as telematics systems provide real-time data on machine performance, enabling proactive maintenance and reducing downtime. This connectivity enhances operational efficiency and helps businesses make informed decisions about their fleet management.

In summary, the Liebherr WU 40 is a top-tier wheel loader that embodies versatility, efficiency, and advanced technology. Its robust engine, effective hydraulic system, operator-friendly cabin, and durable construction make it a valuable asset for any operation requiring reliable material handling capabilities.
Top Page Image Contents