IV. Area Requirements, Safety Regulations

General Remarks

IV. Area Requirements

Verify the following:

•Floors can support refrigerator’s weight plus approxi- mately 1200 pounds (544 kg) of food weight. Not

all Liebherr products are designed for 1200 pounds (544 kg) of food. Some units are smaller and total weights may vary.

•Finished kitchen ﬂoor height is level. Refrigerator must be shimmed to the ﬂoor level, or levelled, to make sure, air vents are not obstructed.

•Remove anything attached to the rear or side walls that can obstruct refrigerator opening.

•Cutout dimensions are accurate.

•Electrical outlet is in correct location.

Do not install this unit next to any other refrigerator or freezer except another Liebherr model. Liebherr models are designed to allow side by side installation. They are equipped with a heating system to eliminate condensa- tion when units are installed side by side. Installing this unit next to any other refrigerator or freezer can cause condensation or cause damage to the Liebherr unit.

To protect the refrigerator from possible damage, allow the appliance to stand 1/2 to 1 hour in place before turning the electricity on. This allows the refrigerant and system lubrication to reach equilibrium.

Blocking For Safety

The anti-tip brackets must be installed to prevent the unit from tipping after it is installed.

V. Safety Regulations

The appliance complies with UL250 and CAN/CSA-C 22,2 No. 63 and is designed to cool, freeze, store food as well as make ice (if equipped). It is designed as a household appliance. If used commercially, the relevant regulations on commercial use must be observed.

The appliance is set to operate within speciﬁc ambient temperature limits according to its climate rating. These temperature limits should not be exceeded. The cor- rect climate rating for your appliance is indicated on the model plate.

This is explained as follows:

Climate	Set for Ambient Temperatures of
Rating

SN	50°F to 90°F (10°C to 32°C)
N	61°F to 90°F (16°C to 32°C)
ST	61°F to 101°F (16°C to 38°C)
T	61°F to 110°F (16°C to 43°C)
SN-ST	50°F to 101°F (10°C to 38°C)
SN-T	50°F to 110°F (10°C to 43°C)

- The refrigerant circuit has been tested for leaks.

48, 24 specifications

Liebherr 24,48 is a sophisticated range of mobile cranes designed for versatility, efficiency, and reliability on construction sites. Renowned for their robust engineering and state-of-the-art technology, these cranes serve various applications across the construction and industrial sectors. With a lifting capacity of up to 48 tons, they offer impressive performance, making them an ideal choice for heavy lifting tasks.

One of the standout features of the Liebherr 24,48 series is the innovative design that simplifies transportation and setup. Equipped with a compact chassis, these cranes can maneuver easily in confined spaces, making them suitable for urban environments. The quick setup time further enhances their efficiency, allowing operators to mobilize quickly and complete tasks on time.

The Liebherr 24,48 cranes are equipped with cutting-edge technology that enhances their performance. The integrated load management system helps ensure safe lifting operations by providing real-time data on load weights and operational limits. This system not only increases safety but also optimizes performance, allowing operators to make informed decisions during lifting operations.

The crane's hydraulic system is another highlight, featuring advanced hydraulic components that ensure smooth operation and responsiveness. This system is designed to minimize energy consumption while maximizing lifting power, contributing to overall sustainability and lowering operating costs.

Furthermore, the Liebherr 24,48 series includes a spacious and ergonomic cab for operators, providing excellent visibility and comfort during operation. The advanced control interface makes it easy for operators to interact with various functions quickly, ensuring precision and reducing the risk of errors.

Safety is paramount in the design of Liebherr cranes, and the 24,48 series includes several features to protect both operators and bystanders. This includes anti-collision systems, emergency stop buttons, and safe load indicators, ensuring that all lifting operations adhere to the highest safety standards.

In summary, the Liebherr 24,48 mobile cranes exemplify cutting-edge engineering and technology, making them a valuable asset for any construction project. Their combination of efficiency, safety, and performance positions them as leaders in the mobile crane market, capable of tackling a wide range of lifting challenges with ease.