Kicker VS10L5, VS12L7, VS12L5, VS10L7, VS8L5, VS8L7 installation instructions Mounting

Page 2

When it is more convenient to mount the enclosure along a side wall, your best option is to put it on the right side of the vehicle. (Shown below) This orientation will point the vent toward the rear of the vehicle and will produce the most low bass output. Remember to leave at least four inches of room between the enclosure and the back of the vehicle.

Port

 

A Least

Front

4"

 

Mounting

After determining the best mounting position, check carefully in the areas where the mounting brackets will go. Make very sure that the mounting screws will not puncture the gas tank, brake lines, wire harnesses, etc., or interfere with any mechanical items on the underside of the chosen mount- ing surface. Turn the enclosure upside-down and attach the four mounting brackets to the bottom of the enclosure using the supplied smaller screws. Each bracket must be positioned so the rounded end protrudes approxi- mately 3/4" from under the cabinet to allow a screw to easily pass through it for attachment to the vehicle.(See Diagram on opposite page.)

Plug your subwoofer speaker wire into the terminals, using the red con- nector as positive and the black connector as negative. Hook the other end of this wire to your subwoofer amplifier in accordance with its owner's man- ual. This enclosure is wired internally to produce a 2 or 4 Ohm load at the terminals depending on the model.

With the enclosure right side up, securely attach it to the vehicle with the supplied larger screws. If the supplied hardware is not applicable to your installation, some other means of securely attaching the enclosure to the vehicle must be used.

To avoid potential injury from forward movement of the enclosure during abrupt stops or accidents, this enclosure must be properly installed and securely fastened to your vehicle.

2

Image 2
Contents Installation Instructions VS8L5/ VS8L7/ VS10L5/ VS10L7 VS12L5/ VS12L7Mounting Specifications VS8L7Speaker Systems Limited Warranty
Related manuals
Manual 10 pages 16.05 Kb Manual 10 pages 13.2 Kb Manual 4 pages 53.08 Kb

VS8L7, VS8L5, VS10L7, VS10L5, VS12L5 specifications

The Kicker brand is renowned for its commitment to high-performance audio equipment, and their subwoofers are no exception. The Kicker DS10L5, TS10L5, and VS12L5 subwoofers represent a blend of cutting-edge technology and innovative design, making them ideal choices for both casual listeners and audio enthusiasts alike.

The Kicker DS10L5 is a 10-inch subwoofer that offers impressive power handling and deep, thunderous bass. One of its main features is the vented pole piece, which enhances airflow and helps to keep the subwoofer cool during operation. The DS10L5 utilizes Kicker's signature Solokon technology, which exhibits a one-piece cone that minimizes distortion, providing a clearer, more precise sound. Additionally, its dual voice coil design allows for diverse wiring configurations, giving users flexibility in integrating it with existing audio systems.

Moving up to the TS10L5, this model also features a 10-inch size but comes with enhancements that cater to bass enthusiasts. It boasts a durable rubber surround that not only improves the subwoofer's longevity but also increases its overall output. The TS10L5 is designed with a high-temperature neodymium magnet, which increases efficiency and power handling capability. Its unique suspension system ensures better cone movement, allowing for a more powerful bass response that remains accurate, even at high volume levels.

For those who prioritize size and sound power, the Kicker VS12L5 offers a robust 12-inch option that is perfect for larger spaces or serious audio setups. The VS12L5 is built with Kicker's advanced technology features, including a high-excursion design that allows for maximum cone movement without sacrificing sound quality. This subwoofer integrates oversized voice coils for improved thermal dissipation, thus enhancing performance during extended play sessions. Additionally, the integrated mounting brackets facilitate easier installation, ensuring that it fits seamlessly into various setups, whether in a vehicle or home theater system.

All three subwoofers—DS10L5, TS10L5, and VS12L5—showcase Kicker's dedication to crafting products that balance power, precision, and durability. Each model is engineered with the user's needs in mind, ensuring an engaging audio experience that brings music and sound effects to life. Whether you're a casual listener or a dedicated audiophile, Kicker's subwoofers present an exceptional choice for anyone looking to elevate their audio experience.